◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD8081/X4

Philips AD8081/X4 is a historical 8-inch nominal full-range driver with 4-ohm impedance and a octagonal flange, identified by original size/shape code 80. The catalogue retains a 176 mm baffle-hole diameter and 68 mm total depth. Its tabulated 206 mm overall value does not establish a circular frame diameter or a cutting contour.

PDF ↗

Driver specifications

Brand
Philips
Family
Medium-power octagonal-flange full-range catalogue
Type
Historical full-range driver with octagonal flange
Nominal size
8 inches - original catalogue nominal
Nominal impedance
4 Ω
Surround
Paper
Original maximum-power label
The original medium-power full-range table labels 8 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Flange shape
octagonal
Original tabulated overall dimension
206 mm; octagonal flange, outline not established
Published baffle opening
176 mm
Total depth
68 mm; not behind-flange mounting depth
Catalogue driver mass
0.37 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
Magnet system label
FXD
Rated frequency band
70–10000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips loudspeakers catalogue excerpt, printed page 384 (PDF page 5); edition and individual production dates unestablished.

The original table column is labelled overall diameter. The coding page identifies a octagonal flange; the tabulated 206 mm value is not established as across-flats, across-corners or a circular machining diameter. The original baffle-hole diameter is 176 mm and total depth is 68 mm. Total depth is not behind-flange mounting depth. Flange outline, corner geometry, fixing-hole positions and machining tolerances are not established.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original medium-power full-range catalogue conditions
Exact version
AD8081/X4, 4 ohms; distinct from other impedance and M/X suffixes.
Original maximum-power label
The original medium-power full-range table labels 8 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Surround and magnet
Paper surround; magnet label FXD. Cone material is not inferred from the surround column.
Assembly mass
0.37 kg as tabulated; not moving mass Mms.
Historical resonance value
A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.

Catalogue status codes and archive filenames are not converted into individual production dates. The unlabelled page photograph is not assigned to this model or hosted.

Original Philips medium-power full-range table ↗ · Printed page 384 / PDF page 5

Flange shape and mounting interpretation
Nominal cone size and flange
Code 80: 8-inch nominal cone size with octagonal flange. Nominal cone size does not define the flange outline.
Original overall dimension
206 mm under the original overall-diameter heading. The coding system specifies a octagonal flange; across-flats and across-corners dimensions are not separately defined.
Baffle opening and total depth
176 mm baffle-hole diameter; 68 mm total depth. Behind-flange mounting depth is not established.
Unverified mounting geometry
No verified circular frame diameter, corner radii, fixing pattern or machining tolerance. Use an exact dimensioned drawing and check the actual historical unit before machining.

The original table uses the heading round. The original coding page separately specifies flange shape; these labels do not establish a machining outline. No original numerical dimension, electrical variant or power rating has been replaced by an inferred correction.

Original Philips coding system ↗ · Printed page 389 / PDF page 9; dimensions from printed page 384 / PDF page 5

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.

Search historical Philips references →