Philips AD7091/M8
Philips AD7091/M8 is a historical 7-inch nominal octagonal full-range driver with 8-ohm impedance. The original 166 mm overall value retains its octagonal-flange context; baffle-hole diameter is 141 mm and total depth is 44 mm. The M code identifies a double-cone wideband response group. The rated 80-18000 Hz band is not a flat-response claim. Its exact impedance remains separate from other printed suffixes.
Driver specifications
- Brand
- Philips
- Family
- Medium-power octagonal full-range catalogue
- Type
- Historical medium-power octagonal full-range driver
- Nominal size
- 7 inches - original catalogue nominal
- Nominal impedance
- 8 Ω
- Surround
- Paper
- Original maximum-power label
- The original medium-power full-range table labels 3 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Original frame dimensions
- 166 mm. The original page 384 table is headed round and labels 166 mm as overall diameter, while code 70 on page 389 specifies an octagonal flange. Preserve 166 mm as the original overall-column value; across-flats/corners and a circular frame diameter are not separately established. Baffle-hole diameter 141 mm and total depth 44 mm are retained. Behind-flange depth, fixing positions, full flange contour and machining tolerances are not established.
- Published baffle opening
- 141 mm
- Total depth
- 44 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.22 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- Ticonal
- Rated frequency band
- 80–18000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips loudspeakers catalogue excerpt, printed pages 384 and 389 (PDF pages 5 and 9); edition and individual production dates unestablished.
The original page 384 table is headed round and labels 166 mm as overall diameter, while code 70 on page 389 specifies an octagonal flange. Preserve 166 mm as the original overall-column value; across-flats/corners and a circular frame diameter are not separately established. Baffle-hole diameter 141 mm and total depth 44 mm are retained. Behind-flange depth, fixing positions, full flange contour and machining tolerances are not established.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original medium-power catalogue conditions
- Exact version
- AD7091/M8, 8 ohms as explicitly tabulated; not a shortened high-impedance suffix or a substituted modern driver.
- Original maximum-power label
- The original medium-power full-range table labels 3 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Octagonal flange and original overall label
- The original page 384 table is headed round and labels 166 mm as overall diameter, while code 70 on page 389 specifies an octagonal flange. Preserve 166 mm as the original overall-column value; across-flats/corners and a circular frame diameter are not separately established. Baffle-hole diameter 141 mm and total depth 44 mm are retained. Behind-flange depth, fixing positions, full flange contour and machining tolerances are not established.
- Surround and magnet
- Paper surround; Ticonal magnet label. Cone material is not inferred from the surround column.
- Assembly mass
- 0.22 kg as tabulated; not moving mass Mms.
- Rated frequency band
- 80-18000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Historical resonance value
- A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.
Catalogue status codes are not production dates. No scan or photograph is assigned or hosted. The round section heading does not override the explicit octagonal-flange code.
Original Philips medium-power nominal round section full-range table ↗ · Printed page 384 / PDF page 5
M response code and flange group
- M code meaning
- The M code identifies a double-cone group described as having smooth response over a wide frequency range. The general code and schematic curves do not establish numeric sensitivity, response tolerance or a measured response trace.
- Nominal size and flange
- Code 70 identifies 7 inches nominal and octagonal flange. Nominal dimensions do not establish a complete machining contour.
- Exact impedance suffix
- 8 ohms is explicitly printed for AD7091/M8. Electrical variants remain separate; ratings and measurements from a different suffix are not substituted.
Frequency-response sketches illustrate code families; they are not digitized into numerical driver measurements.
Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.