Philips AD7080/M4
Philips AD7080/M4 is a historical 7-inch nominal full-range driver with 4-ohm impedance and a octagonal flange, identified by original size/shape code 70. The catalogue retains a 141 mm baffle-hole diameter and 58 mm total depth. Its tabulated 166 mm overall value does not establish a circular frame diameter or a cutting contour.
Driver specifications
- Brand
- Philips
- Family
- Medium-power octagonal-flange full-range catalogue
- Type
- Historical full-range driver with octagonal flange
- Nominal size
- 7 inches - original catalogue nominal
- Nominal impedance
- 4 Ω
- Surround
- Paper
- Original maximum-power label
- The original medium-power full-range table labels 6 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Flange shape
- octagonal
- Original tabulated overall dimension
- 166 mm; octagonal flange, outline not established
- Published baffle opening
- 141 mm
- Total depth
- 58 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.29 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- FXD
- Rated frequency band
- 80–18000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips loudspeakers catalogue excerpt, printed page 384 (PDF page 5); edition and individual production dates unestablished.
The original table column is labelled overall diameter. The coding page identifies a octagonal flange; the tabulated 166 mm value is not established as across-flats, across-corners or a circular machining diameter. The original baffle-hole diameter is 141 mm and total depth is 58 mm. Total depth is not behind-flange mounting depth. Flange outline, corner geometry, fixing-hole positions and machining tolerances are not established.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original medium-power full-range catalogue conditions
- Exact version
- AD7080/M4, 4 ohms; distinct from other impedance and M/X suffixes.
- Original maximum-power label
- The original medium-power full-range table labels 6 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Surround and magnet
- Paper surround; magnet label FXD. Cone material is not inferred from the surround column.
- Assembly mass
- 0.29 kg as tabulated; not moving mass Mms.
- Historical resonance value
- A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.
Catalogue status codes and archive filenames are not converted into individual production dates. The unlabelled page photograph is not assigned to this model or hosted.
Original Philips medium-power full-range table ↗ · Printed page 384 / PDF page 5
Flange shape and mounting interpretation
- Nominal cone size and flange
- Code 70: 7-inch nominal cone size with octagonal flange. Nominal cone size does not define the flange outline.
- Original overall dimension
- 166 mm under the original overall-diameter heading. The coding system specifies a octagonal flange; across-flats and across-corners dimensions are not separately defined.
- Baffle opening and total depth
- 141 mm baffle-hole diameter; 58 mm total depth. Behind-flange mounting depth is not established.
- Unverified mounting geometry
- No verified circular frame diameter, corner radii, fixing pattern or machining tolerance. Use an exact dimensioned drawing and check the actual historical unit before machining.
The original table uses the heading round. The original coding page separately specifies flange shape; these labels do not establish a machining outline. No original numerical dimension, electrical variant or power rating has been replaced by an inferred correction.
Original Philips coding system ↗ · Printed page 389 / PDF page 9; dimensions from printed page 384 / PDF page 5
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.