◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD5060/W8

Historical 5-inch nominal Philips AD5060/W8 woofer with 8-ohm impedance and rubber surround. The original table specifies a 129 mm frame and 108 mm baffle opening. Its system-power figure belongs to a complete loudspeaker system; the other impedance and suffix variants remain separate.

PDF ↗

Driver specifications

Brand
Philips
Family
High-power high-fidelity catalogue
Type
Historical woofer
Nominal size
5 inches — original catalogue nominal
Nominal impedance
8 Ω
Surround
Rubber
System-power context
The table lists 10 W system power, for a complete two- or three-way system with the specified crossover and enclosure. It is not published here as an individual woofer AES/RMS input rating.
Overall diameter
129 mm
Published baffle opening
108 mm
Total depth
56 mm; not behind-flange mounting depth
Catalogue driver mass
0.7 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of the individual used unit.
Magnet system label
FXD
Rated frequency band
50–5000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips loudspeakers catalogue excerpt, printed page 381 (PDF page 2); edition and individual production dates unestablished.

Original table: 129 mm overall diameter, 108 mm baffle-hole diameter and 56 mm total depth. Total depth is not behind-flange mounting depth; mounting-hole geometry and machining tolerances are not supplied.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original catalogue conditions
System-power context
10 W for the named complete two- or three-way system; the prescribed crossover and enclosure are part of the original condition.
Surround and magnet
Rubber surround; magnet system printed as FXD. Cone material is not inferred from the surround entry.
Exact version
AD5060/W8, 8 ohms; separate from the other impedance and non-W suffixes.

The archive filename is not proof of a production period. Historical T/S awaits independent exact-variant corroboration; no manufacturer scan or photograph is hosted.

Original Philips catalogue table and system-power note ↗ · Printed pages 380–381 / PDF pages 1–2

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical out-of-production Philips catalogue reference. Original parts, used-unit condition and remaining stock require individual confirmation.

Search historical Philips references →