Philips AD4691/M800
Philips AD4691/M800 is a historical 4 x 6-inch nominal oval full-range driver with 800-ohm impedance. The original catalogue retains 102 x 154 mm frame axes, 89 x 141 mm baffle-hole axes and 52 mm total depth. The M code identifies a double-cone wideband response group. The rated 100-20000 Hz band is not a flat-response claim. Its exact impedance remains separate from other printed suffixes.
Driver specifications
- Brand
- Philips
- Family
- Medium-power oval full-range catalogue
- Type
- Historical medium-power oval full-range driver
- Nominal size
- 4 x 6 inches - original oval nominal
- Nominal impedance
- 800 Ω
- Surround
- Paper
- Original maximum-power label
- The original medium-power full-range table labels 4 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Original frame dimensions
- 102 x 154 mm (oval axes; complete contour not supplied)
- Published baffle opening
- 89 x 141 mm (oval axes; contour not supplied)
- Total depth
- 52 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.16 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- Ticonal
- Rated frequency band
- 100–20000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips loudspeakers catalogue excerpt, printed pages 387 and 389 (PDF pages 7 and 9); edition and individual production dates unestablished.
Original oval table: 102 x 154 mm overall size, 89 x 141 mm baffle-hole size and 52 mm total depth. The two axes are preserved; neither axis is a circular diameter. Total depth is not behind-flange mounting depth; full cutout contour, fixing-hole geometry and machining tolerances are not supplied.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original medium-power catalogue conditions
- Exact version
- AD4691/M800, 800 ohms as explicitly tabulated; not a shortened low-impedance suffix or a substituted modern driver.
- Original maximum-power label
- The original medium-power full-range table labels 4 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Oval frame and baffle opening
- Original oval table: 102 x 154 mm overall size, 89 x 141 mm baffle-hole size and 52 mm total depth. The two axes are preserved; neither axis is a circular diameter. Total depth is not behind-flange mounting depth; full cutout contour, fixing-hole geometry and machining tolerances are not supplied.
- Surround and magnet
- Paper surround; Ticonal magnet label. Cone material is not inferred from the surround column.
- Assembly mass
- 0.16 kg as tabulated; not moving mass Mms.
- Rated frequency band
- 100-20000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Historical resonance value
- A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.
Catalogue status codes are not production dates. No scan or photograph is assigned or hosted. Oval axes do not establish a circular cutout or complete machining template.
Original Philips medium-power oval full-range table ↗ · Printed page 387 / PDF page 7
M response code and flange group
- M code meaning
- The M code identifies a double-cone group described as having smooth response over a wide frequency range. The general code and schematic curves do not establish numeric sensitivity, response tolerance or a measured response trace.
- Nominal size and flange
- Code 46 identifies 4 x 6 inches nominal and oval flange. Nominal dimensions do not establish a complete machining contour.
- Exact impedance suffix
- 800 ohms is explicitly printed for AD4691/M800. Electrical variants remain separate; ratings and measurements from a different suffix are not substituted.
Frequency-response sketches illustrate code families; they are not digitized into numerical driver measurements.
Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.