Philips AD4472/X4
Philips AD4472/X4 is a historical 4-inch nominal low-power wideband driver with 4-ohm impedance and a square flange (code 44). Its catalogue retains a 96 mm baffle-hole diameter, 29 mm total depth and paper surround. The original 105 mm overall value does not establish a circular frame diameter or cutting contour. The X code identifies response emphasis similar to Z over a wider frequency range; the rated 150-8000 Hz band is not a flat-response claim.
Driver specifications
- Brand
- Philips
- Family
- Low-power square-flange wideband catalogue
- Type
- Historical low-power wideband driver with square flange
- Nominal size
- 4 inches - original catalogue nominal
- Nominal impedance
- 4 Ω
- Surround
- Paper
- Original maximum-power label
- The original low-power table labels 2 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Original tabulated overall dimension
- 105 mm; square flange, outline not established
- Published baffle opening
- 96 mm
- Total depth
- 29 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.087 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- FXD
- Rated frequency band
- 150–8000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips loudspeakers catalogue excerpt, printed pages 388-389 (PDF pages 8-9); edition and individual production dates unestablished.
The original table column is labelled overall diameter. Code 44 identifies a square flange; 105 mm is not established as across-flats, across-corners or a circular machining diameter. Original baffle-hole diameter 96 mm and total depth 29 mm retained. Total depth is not behind-flange mounting depth; flange outline, fixing positions, corner geometry and machining tolerances are not established.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original low-power catalogue conditions
- Exact version
- AD4472/X4, 4 ohms; each exact suffix remains a separate impedance reference.
- Original maximum-power label
- The original low-power table labels 2 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Surround and magnet
- Paper surround, explicitly stated for all rows on this page; magnet label FXD. Cone material is not inferred from the surround label.
- Assembly mass
- 0.087 kg as tabulated; not moving mass Mms.
- Rated frequency band
- 150-8000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Historical resonance value
- A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.
Catalogue status codes are not production dates. Unlabelled page photographs are not assigned to these exact models or hosted.
Original Philips low-power round-driver table ↗ · Printed page 388 / PDF page 8
X response code and square-flange reference
- X code meaning
- The original coding explanation identifies response emphasis similar to Z over a wider frequency range. It does not specify absolute sensitivity or guarantee a flat response.
- Nominal cone and flange
- Code 44 identifies a nominal 4-inch cone and square flange. Nominal cone size does not define the flange outline.
- Original overall dimension
- 105 mm under the original overall-diameter table heading. Across-flats/corners dimensions and a circular frame diameter are not separately established.
- Baffle opening and total depth
- 96 mm baffle-hole diameter; 29 mm total depth. Behind-flange depth and fixing geometry are not established.
Approximate illustrative response curves are not digitized into sensitivity, measurement traces or T/S values.
Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.