◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD4070/Y4

Philips AD4070/Y4 is a historical 4-inch nominal low-power wideband driver with 4-ohm impedance. Its original catalogue records a 105 mm round frame, 96 mm baffle opening and paper surround. The Y response code identifies response emphasis in the 2-6 kHz region; the published 150-8000 Hz band is not a flat-response claim.

PDF ↗

Driver specifications

Brand
Philips
Family
Low-power round wideband catalogue
Type
Historical low-power round wideband driver
Nominal size
4 inches - original catalogue nominal
Nominal impedance
4 Ω
Surround
Paper
Original maximum-power label
The original low-power table labels 1 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Overall diameter
105 mm
Published baffle opening
96 mm
Total depth
29 mm; not behind-flange mounting depth
Catalogue driver mass
0.079 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
Magnet system label
FXD
Rated frequency band
150–8000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips loudspeakers catalogue excerpt, printed pages 388-389 (PDF pages 8-9); edition and individual production dates unestablished.

Original round table: 105 mm overall diameter, 96 mm baffle-hole diameter and 29 mm total depth. Total depth is not behind-flange mounting depth; fixing-hole geometry and machining tolerances are not supplied.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original low-power catalogue conditions
Exact version
AD4070/Y4, 4 ohms; each suffix is a separate impedance reference. The original page says the final type-number digits specify rated impedance.
Original maximum-power label
The original low-power table labels 1 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Surround and magnet
Paper surround, explicitly stated for all rows on this page; magnet label FXD. Cone material is not inferred from the surround label.
Assembly mass
0.079 kg as tabulated; not moving mass Mms.
Rated frequency band
150-8000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Historical resonance value
A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.

Catalogue status codes are not production dates. Unlabelled page photographs are not assigned to these exact models or hosted.

Original Philips low-power round-driver table ↗ · Printed page 388 / PDF page 8

Y response code and original coding reference
Y code meaning
The original coding explanation identifies response emphasis in the 2-6 kHz region. It does not specify absolute sensitivity or guarantee a flat response across the rated band.
Impedance and geometry
The exact final digits match the nominal-impedance code. The nominal 4-inch size comes from the original table heading; size/shape code 40 denotes a round flange, while 105 mm is the tabulated frame diameter.

Approximate illustrative response curves are not digitized into sensitivity, measurement traces or T/S values.

Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.

Search historical Philips references →