◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD3590/X400

Philips AD3590/X400 is a historical 3 x 5-inch nominal oval full-range driver with 400-ohm impedance. The original catalogue retains 76 x 131 mm frame axes, 66 x 121 mm baffle-hole axes and 43 mm total depth. The X code indicates response emphasis similar to Z over a wider frequency range. The rated 140-12000 Hz band is not a flat-response claim. Its exact impedance remains separate from other printed suffixes.

PDF ↗

Driver specifications

Brand
Philips
Family
Medium-power oval full-range catalogue
Type
Historical medium-power oval full-range driver
Nominal size
3 x 5 inches - original oval nominal
Nominal impedance
400 Ω
Surround
Paper
Original maximum-power label
The original medium-power full-range table labels 3 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Original frame dimensions
76 x 131 mm (oval axes; complete contour not supplied)
Published baffle opening
66 x 121 mm (oval axes; contour not supplied)
Total depth
43 mm; not behind-flange mounting depth
Catalogue driver mass
0.13 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
Magnet system label
Ticonal
Rated frequency band
140–12000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips loudspeakers catalogue excerpt, printed pages 386 and 389 (PDF pages 6 and 9); edition and individual production dates unestablished.

Original oval table: 76 x 131 mm overall size, 66 x 121 mm baffle-hole size and 43 mm total depth. The two axes are preserved; neither axis is a circular diameter. Total depth is not behind-flange mounting depth; full cutout contour, fixing-hole geometry and machining tolerances are not supplied.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original medium-power catalogue conditions
Exact version
AD3590/X400, 400 ohms as explicitly tabulated; not a shortened low-impedance suffix or a substituted modern driver.
Original maximum-power label
The original medium-power full-range table labels 3 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Oval frame and baffle opening
Original oval table: 76 x 131 mm overall size, 66 x 121 mm baffle-hole size and 43 mm total depth. The two axes are preserved; neither axis is a circular diameter. Total depth is not behind-flange mounting depth; full cutout contour, fixing-hole geometry and machining tolerances are not supplied.
Surround and magnet
Paper surround; Ticonal magnet label. Cone material is not inferred from the surround column.
Assembly mass
0.13 kg as tabulated; not moving mass Mms.
Rated frequency band
140-12000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Historical resonance value
A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.

Catalogue status codes are not production dates. No scan or photograph is assigned or hosted. Oval axes do not establish a circular cutout or complete machining template.

Original Philips medium-power oval full-range table ↗ · Printed page 386 / PDF page 6

X response code and flange group
X code meaning
The X code identifies response emphasis similar to Z over a wider frequency range. The general code and schematic curves do not establish numeric sensitivity, response tolerance or a measured response trace.
Nominal size and flange
Code 35 identifies 3 x 5 inches nominal and oval flange. Nominal dimensions do not establish a complete machining contour.
Exact impedance suffix
400 ohms is explicitly printed for AD3590/X400. Electrical variants remain separate; ratings and measurements from a different suffix are not substituted.

Frequency-response sketches illustrate code families; they are not digitized into numerical driver measurements.

Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.

Search historical Philips references →