◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD2090/T4

Philips AD2090/T4 is a historical 2-inch cone tweeter with 4-ohm nominal impedance and an original rated 2500-19000 Hz band. The 20 W label applies to a complete filtered two- or three-way system; it is not standalone tweeter input power. Original dimensions and material-column conditions are retained in the source notes.

PDF ↗

Driver specifications

Brand
Philips
Family
High-fidelity tweeter catalogue
Type
Historical 2-inch cone tweeter
Nominal size
2-inch cone - original catalogue nominal
Nominal impedance
4 Ω
Original material entry
Paper. The source surround/dome-material column lists paper. Cone composition and a separate surround composition are not independently identified; neither is inferred from this column.
Original complete-system power label
20 W. The 20 W system-power label applies to complete filtered two- or three-way loudspeaker systems. The original note refers to crossover networks and enclosure volumes on printed page383. These figures are not standalone tweeter input power, RMS/AES ratings or a power specification for each individual driver.
Original tabulated overall value
51 mm. The original table labels 51 mm as overall diameter. Code20 identifies the nominal2 to2 1/2-inch round-flange group, while this exact row specifies2 inches; full flange and fixing geometry are not supplied.
Published baffle opening
44 mm
Total depth
29 mm; not behind-flange mounting depth
Catalogue driver mass
0.1 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
Magnet system label
Ticonal
Rated frequency band
2500–19000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips catalogue, printed pages380 and389 (PDF pages1 and9); edition and individual production dates unestablished.

The original table labels 51 mm as overall diameter. Code20 identifies the nominal2 to2 1/2-inch round-flange group, while this exact row specifies2 inches; full flange and fixing geometry are not supplied. Original baffle-hole diameter 44 mm and total depth 29 mm are retained. Total depth is not behind-flange mounting depth; complete machining geometry is not supplied.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original tweeter catalogue conditions
Exact version
AD2090/T4, 4 ohms; each explicitly printed impedance and revision remains separate.
Original complete-system power label
20 W. The 20 W system-power label applies to complete filtered two- or three-way loudspeaker systems. The original note refers to crossover networks and enclosure volumes on printed page383. These figures are not standalone tweeter input power, RMS/AES ratings or a power specification for each individual driver.
Rated frequency band
2500-19000 Hz; original endpoints without a stated response tolerance, voltage, distance or enclosure for the response measurement.
Source material column
Paper. The source surround/dome-material column lists paper. Cone composition and a separate surround composition are not independently identified; neither is inferred from this column.
Magnet system and assembly mass
Ticonal label; 0.1 kg complete-driver mass, not moving mass Mms.
Historical parameters
All historical Fs/T/S values remain withheld until independently corroborated for this exact variant.

Historical status letters and the archive filename are not converted into production dates or present availability. No catalogue photograph or scan is hosted.

Original Philips high-fidelity tweeter table and system-power note ↗ · Printed page380 / PDF page1

Nominal size, flange and mounting context
Nominal size and role
2-inch cone tweeter as explicitly headed in the original table. Code20 covers the original2 to2 1/2-inch round group; exact table nominal is2 inches.
Original overall dimension
The original table labels 51 mm as overall diameter. Code20 identifies the nominal2 to2 1/2-inch round-flange group, while this exact row specifies2 inches; full flange and fixing geometry are not supplied.
Baffle opening and total depth
44 mm baffle-hole diameter; 29 mm total depth. Behind-flange mounting depth, full contour, fixing locations and tolerances are not established.

The generic coding explanation and sketches do not supply a dimensioned machining drawing or numerical response measurement.

Original Philips coding-system explanation; exact dimensions from printed380 ↗ · Printed pages380/389 / PDF pages1/9

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.

Search historical Philips references →