Philips AD2090/T15
Philips AD2090/T15 is a historical 2-inch cone tweeter with 15-ohm nominal impedance and an original rated 2500-19000 Hz band. The 20 W label applies to a complete filtered two- or three-way loudspeaker system, not standalone tweeter input power. Original round-flange geometry and ambiguous material-column conditions remain explicit in the source notes.
Driver specifications
- Brand
- Philips
- Family
- High-fidelity tweeter catalogue
- Type
- Historical 2-inch cone tweeter with round flange
- Nominal size
- 2-inch cone - original catalogue nominal
- Nominal impedance
- 15 Ω
- Original material entry
- Paper. The source surround/dome-material column lists paper. Cone composition and a separate surround composition are not independently identified; neither is inferred from this column.
- Original complete-system power label
- 20 W. The 20 W system-power label applies to complete filtered two- or three-way loudspeaker systems. The original note refers to crossover networks and enclosure volumes on printed page 383. These figures are not standalone tweeter input power or RMS/AES driver ratings.
- Original tabulated overall value
- 51 mm. The original table labels 51 mm as overall diameter. Code 20 identifies a nominal 2 to 2 1/2-inch round-flange group, while this exact row specifies 2 inches. Full flange and fixing geometry are not supplied.
- Published baffle opening
- 44 mm
- Total depth
- 29 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.1 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- Ticonal
- Rated frequency band
- 2500–19000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips catalogue, printed pages380 and389 (PDF pages1 and9); edition and individual production dates unestablished.
The original table labels 51 mm as overall diameter. Code 20 identifies a nominal 2 to 2 1/2-inch round-flange group, while this exact row specifies 2 inches. Full flange and fixing geometry are not supplied. Original baffle-hole diameter 44 mm and total depth 29 mm retained. Total depth is not behind-flange mounting depth; a complete machining contour is not supplied.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original tweeter catalogue conditions
- Exact version
- AD2090/T15, 15 ohms; each printed impedance and revision remains separate.
- Original complete-system power label
- 20 W. The 20 W system-power label applies to complete filtered two- or three-way loudspeaker systems. The original note refers to crossover networks and enclosure volumes on printed page 383. These figures are not standalone tweeter input power or RMS/AES driver ratings.
- Rated frequency band
- 2500-19000 Hz; original endpoints without a stated tolerance, voltage, distance or measurement enclosure.
- Source material column
- Paper. The source surround/dome-material column lists paper. Cone composition and a separate surround composition are not independently identified; neither is inferred from this column.
- Magnet system and assembly mass
- Ticonal label; 0.1 kg complete-driver mass, not moving mass Mms. No magnet dimensions or magnet mass are inferred from a different code.
- Historical parameters
- All historical Fs/T/S values remain withheld until independently corroborated for this exact variant.
Historical status letters and the archive filename are not converted into production dates or present availability. No catalogue photograph or scan is hosted.
Original Philips high-fidelity tweeter table and system-power note ↗ · Printed page380 / PDF page1
Nominal size, flange and mounting context
- Nominal size and role
- 2-inch cone tweeter as explicitly headed in the table. Code 20 covers the original 2 to 2 1/2-inch round-flange group; the exact nominal size here is 2 inches.
- Original overall dimension
- The original table labels 51 mm as overall diameter. Code 20 identifies a nominal 2 to 2 1/2-inch round-flange group, while this exact row specifies 2 inches. Full flange and fixing geometry are not supplied.
- Baffle opening and total depth
- 44 mm baffle-hole diameter; 29 mm total depth. Behind-flange depth, complete contour, fixing locations and tolerances are not established.
The generic coding explanation and sketches do not supply a dimensioned machining drawing or numerical response measurement.
Original Philips coding-system explanation; exact dimensions from printed380 ↗ · Printed pages380/389 / PDF pages1/9
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.