Philips AD2071/Z15
Philips AD2071/Z15 is a historical 2.5-inch nominal low-power wideband driver with 15-ohm impedance. Its original catalogue records a 64 mm round frame, 59 mm baffle opening and paper surround. The Z response code identifies emphasis near 3 kHz; the published 250-9000 Hz band is not a flat-response claim.
Driver specifications
- Brand
- Philips
- Family
- Low-power round wideband catalogue
- Type
- Historical low-power round wideband driver
- Nominal size
- 2.5 inches - original catalogue nominal
- Nominal impedance
- 15 Ω
- Surround
- Paper
- Original maximum-power label
- The original low-power table labels 1 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Overall diameter
- 64 mm
- Published baffle opening
- 59 mm
- Total depth
- 20 mm; not behind-flange mounting depth
- Catalogue driver mass
- 0.07 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
- Magnet system label
- FXD
- Rated frequency band
- 250–9000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Original reference
- Original Philips loudspeakers catalogue excerpt, printed pages 388-389 (PDF pages 8-9); edition and individual production dates unestablished.
Original round table: 64 mm overall diameter, 59 mm baffle-hole diameter and 20 mm total depth. Total depth is not behind-flange mounting depth; fixing-hole geometry and machining tolerances are not supplied.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original low-power catalogue conditions
- Exact version
- AD2071/Z15, 15 ohms; each suffix is a separate impedance reference. The original page says the final type-number digits specify rated impedance.
- Original maximum-power label
- The original low-power table labels 1 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
- Surround and magnet
- Paper surround, explicitly stated for all rows on this page; magnet label FXD. Cone material is not inferred from the surround label.
- Assembly mass
- 0.07 kg as tabulated; not moving mass Mms.
- Rated frequency band
- 250-9000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
- Historical resonance value
- A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.
Catalogue status codes are not production dates. Unlabelled page photographs are not assigned to these exact models or hosted.
Original Philips low-power round-driver table ↗ · Printed page 388 / PDF page 8
Z response code and original coding reference
- Z code meaning
- The original coding explanation identifies response emphasis near 3 kHz. It does not specify absolute sensitivity or guarantee a flat response across the rated band.
- Impedance and geometry
- The exact final digits match the nominal-impedance code. The nominal 2.5-inch size comes from the original table heading, while 64 mm is the tabulated frame diameter.
Approximate illustrative response curves are not digitized into sensitivity, measurement traces or T/S values.
Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9
Thiele/Small parameters
Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.
Sources & availability
Original Philips catalogue ↗ · Original Philips catalogue PDF ↗
Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.