◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Philips AD0199/Z25

Philips AD0199/Z25 is a historical 1.25-inch nominal low-power driver with 25-ohm impedance and original code-01 size/shape group labelled dome. Its catalogue retains a 26.5 mm baffle-hole diameter, 16 mm total depth and paper surround. The original dome-group label is not sufficient to identify a modern tweeter or a full machining outline. The Z code identifies response emphasis at about 3 kHz; the rated 550-13000 Hz band is not a flat-response claim.

PDF ↗

Driver specifications

Brand
Philips
Family
Low-power small-driver catalogue
Type
Historical low-power small driver; original code-01 dome group
Nominal size
1.25 inches - original catalogue nominal
Nominal impedance
25 Ω
Surround
Paper
Original maximum-power label
The original low-power table labels 0.2 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Original tabulated overall dimension
31 mm. The table labels 31 mm as overall diameter. Code 01 identifies the original 1 to 1 1/4-inch size/shape group labelled dome; a complete flange outline and modern driver classification are not established by this code.
Published baffle opening
26.5 mm
Total depth
16 mm; not behind-flange mounting depth
Catalogue driver mass
0.017 kg. Catalogue complete-driver mass in kg; not moving mass Mms or a measurement of an individual used unit.
Magnet system label
Ticonal
Rated frequency band
550–13000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Original reference
Original Philips loudspeakers catalogue excerpt, printed pages 388-389 (PDF pages 8-9); edition and individual production dates unestablished.

The table labels 31 mm as overall diameter. Code 01 identifies the original 1 to 1 1/4-inch size/shape group labelled dome; a complete flange outline and modern driver classification are not established by this code. Original baffle-hole diameter 26.5 mm and total depth 16 mm retained. Total depth is not behind-flange mounting depth; fixing positions, detailed flange contour and machining tolerances are not established.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original low-power catalogue conditions
Exact version
AD0199/Z25, 25 ohms; each printed exact suffix remains a separate impedance reference.
Original maximum-power label
The original low-power table labels 0.2 W as max power. Test signal, standard, duration and measurement enclosure are not specified; no AES/RMS or continuous rating is inferred.
Surround and magnet
Paper surround, explicitly stated for all rows on this page; magnet label Ticonal. Cone material is not inferred from the surround label.
Assembly mass
0.017 kg as tabulated; not moving mass Mms.
Rated frequency band
550-13000 Hz. Original rated frequency-band endpoints; no response tolerance, voltage, distance or measurement enclosure is specified in this table.
Historical resonance value
A single original catalogue lists resonance, but Fs and other historical T/S remain withheld pending independent exact-variant corroboration.

Catalogue status codes are not production dates. Unlabelled page photographs are not assigned to these exact models or hosted.

Original Philips low-power round-driver table ↗ · Printed page 388 / PDF page 8

Z response code and original size/shape group
Z code meaning
The original coding explanation identifies response emphasis at about 3 kHz. It does not specify absolute sensitivity or guarantee a flat response.
Nominal size and flange group
The table explicitly places this driver under 1 1/4 inches; code 01 covers the original 1 to 1 1/4-inch group labelled dome. This does not establish a modern tweeter role, diaphragm material or complete flange geometry.
Original overall dimension
31 mm under the original overall-diameter table heading. Complete frame shape and mounting outline remain unestablished.
Baffle opening and total depth
26.5 mm baffle-hole diameter; 16 mm total depth. Behind-flange depth and fixing geometry are not established.

Approximate illustrative response curves are not digitized into sensitivity, measurement traces or T/S values.

Original Philips coding-system explanation ↗ · Printed page 389 / PDF page 9

Thiele/Small parameters

Historical T/S values require two credible corroborating sources for this exact variant before publication. No modern replacement or reconed-unit values are substituted.

Sources & availability

Original Philips catalogue ↗ · Original Philips catalogue PDF ↗

Historical Philips catalogue reference. Used-unit condition, modifications and availability require individual confirmation.

Search historical Philips references →