Morel TSCT 1044
Morel TSCT 1044 tweeter reference from its original specification sheet. Published measurement conditions and exact model geometry are retained; confirm the latest revision with Morel.
Manufacturer front and angled viewsDriver specifications
- Family
- Titanium Supreme
- Type
- Tweeter
- Nominal size / identification
- 28 mm voice coil; 104 mm faceplate
- Nominal impedance
- 4 Ω
- Diaphragm material
- Acuflex coated silk dome
- Overall diameter
- 104 mm
- Baffle cutout
- 72.8 mm
- Overall height
- 32.3 mm
- Mounting depth
- See original drawing and terminal clearance
- Source checked
- 2026-10-16
Construction, mounting & original reference
Open a section for documented details and its original source.
Construction and rated performance
- Family
- Titanium Supreme
- Sensitivity
- 95 dB SPL; 2.83 V / 1 m
- Nominal power
- 200 W. Manufacturer DIN designation; standard number, test band and duration are not stated.
- Voice-coil diameter
- 28 mm
- Coil former / wire
- Titanium former; Hexatech aluminium wire, two layers
- Magnet
- Vented neodymium
- Net mass
- 0.5 kg
Power, sensitivity and response retain the original source conditions.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Original mounting dimensions
- Overall diameter
- 104 mm
- Overall height D
- 32.3 mm
- Basket/chamber depth E
- 28.3 mm
- Flange thickness C
- 3 mm
- Fixing circle
- 94 mm
- Fixing holes
- 6 equally spaced; 3.7 mm diameter
- Baffle opening
- 72.8 mm as labelled in the drawing
Overall height, basket depth and baffle opening are different dimensions. Confirm the complete original drawing and terminal clearances before machining.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Small-signal and 1 V columns
- Small Signal
- Fs 591 Hz; Qms 2.44; Qes 0.55; Qts 0.44
- 1 V
- Fs 573 Hz; Qms 2.41; Qes 0.53; Qts 0.43
- Response method
- IEC baffle, 0.5 m microphone distance, 2.83 V RMS, normalised to 1 m with 1/12-octave smoothing
The two parameter columns are kept separate. The 1 V impedance plot uses a stepped sine in free air without smoothing.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Thiele/Small parameters
Primary values use the Small Signal column: Fs 591 Hz, Qms 2.44, Qes 0.55, Qts 0.44. The separate 1 V column lists Fs 573 Hz, Qms 2.41, Qes 0.53 and Qts 0.43. Le is at 1 kHz. Printed Rms has a nonstandard unit and is not converted to kg/s.
- Fs · resonance
- 591 Hz
- Qts · total Q
- 0.44
- Qes · electrical Q
- 0.55
- Qms · mechanical Q
- 2.44
- Re · DC resistance
- 4.19 Ω
- Le · inductance
- 0.047 mH
- Sd · piston area
- 6 cm²
- Xmax · linear excursion
- 1 mm
Only populated, resolved source fields are listed. These are reference specifications, not measurements of your individual driver.
Sources & availability
Morel product and documentation ↗
Listed in Morel’s raw-driver catalogue. Live stock and the latest production revision require confirmation with Morel.
Original sheet reviewed is undated. Confirm the current revision and full mounting drawing with Morel.