SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Morel TSCM 634

Morel TSCM 634 midrange reference from its original specification sheet. Published measurement conditions and exact model geometry are retained; confirm the latest revision with Morel.

PDF / documentation ↗

Driver specifications

Family
Titanium Supreme Coppersleeve
Type
Midrange
Nominal size / identification
6 inches — original nominal designation
Nominal impedance
4 Ω
Diaphragm material
Carbon fibre / Rohacell / carbon fibre sandwich
Overall diameter
160 mm
Baffle cutout
140 mm
Overall height
69 mm
Mounting depth
See original drawing and terminal clearance
Source checked
2026-10-16

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Family
Titanium Supreme Coppersleeve
Sensitivity
89 dB SPL; 2.83 V / 1 m
Nominal power
150 W. Manufacturer DIN designation; standard number, test band and duration are not stated.
Voice-coil diameter
75 mm
Coil former / wire
Titanium former; Hexatech aluminium wire, two layers
Magnet
Hybrid neodymium/ferrite
Net mass
1.42 kg
Transient power
1000 W for 10 ms; distinct from nominal power
Chassis
Uniflow die-cast aluminium

Power, sensitivity and response retain the original source conditions.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Original mounting dimensions
Overall diameter
160 mm
Overall height D
69 mm
Basket/chamber depth E
63 mm
Flange thickness C
6 mm
Fixing circle
152 mm
Fixing holes
6 equally spaced; 4.2 mm diameter
Baffle opening
140 mm as labelled in the drawing

Overall height, basket depth and baffle opening are different dimensions. Confirm the complete original drawing and terminal clearances before machining.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Original-source inconsistency
Printed Qts
0.53
Other printed Q values
Qes 0.56 and Qms 4.25; their parallel relationship is approximately 0.495
Library treatment
Qts remains unfilled and this model is excluded from automatic T/S cabinet selection

A calculated number is not substituted for an unresolved manufacturer specification.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Thiele/Small parameters

Values transcribed from the populated original table. Le is measured at 1 kHz. Excitation level is not inferred where the source leaves it unspecified. Blank fields remain unreported. The printed Qts is 0.53, inconsistent with Qes 0.56 and Qms 4.25; Qts is withheld rather than silently corrected.

Fs · resonance
49 Hz
Qes · electrical Q
0.56
Qms · mechanical Q
4.25
Vas · equivalent volume
13.3 L
Re · DC resistance
3.3 Ω
Le · inductance
0.11 mH
Sd · piston area
119 cm²
BL · force factor
5.09 N/A
Mms · moving mass
15.3 g
Cms · compliance
0.86 mm/N
Rms · mechanical resistance
0.55 kg/s
Xmax · linear excursion
5.25 mm

Only populated, resolved source fields are listed. These are reference specifications, not measurements of your individual driver.

Sources & availability

Morel product and documentation ↗

Listed in Morel’s raw-driver catalogue. Live stock and the latest production revision require confirmation with Morel.

Original sheet reviewed is undated. Confirm the current revision and full mounting drawing with Morel.

Search Morel drivers →