Morel ST 728
Morel ST 728 tweeter reference from its original specification sheet. Published measurement conditions and exact model geometry are retained; confirm the latest revision with Morel.
Manufacturer angled product viewDriver specifications
- Family
- Supreme
- Type
- Tweeter
- Nominal size / identification
- 28 mm voice coil; 72 mm faceplate
- Nominal impedance
- 8 Ω
- Diaphragm material
- Acuflex hand-coated soft dome
- Overall diameter
- 72 mm
- Baffle cutout
- See original terminal-relief drawing
- Overall height
- 53 mm
- Mounting depth
- See original drawing and terminal clearance
- Source checked
- 2026-10-16
Construction, mounting & original reference
Open a section for documented details and its original source.
Construction and rated performance
- Family
- Supreme
- Sensitivity
- 91 dB SPL; 1 W / 1 m
- Nominal power
- 120 W. Manufacturer DIN designation; standard number, test band and duration are not stated.
- Voice-coil diameter
- 28 mm
- Coil former / wire
- Aluminium former; Hexatech aluminium wire, two layers
- Magnet
- Neodymium flat pancake
- Net mass
- 0.21 kg
- Transient power
- 1000 W for 10 ms; distinct from nominal power
Power, sensitivity and response retain the original source conditions.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Original mounting dimensions
- Overall diameter
- 72 mm
- Overall height D
- 53 mm
- Basket/chamber depth E
- 50 mm
- Flange thickness C
- 3 mm
- Fixing circle
- 64 mm
- Fixing holes
- 6 equally spaced; 3.7 mm diameter
- Baffle opening
- See the original terminal-relief drawing; chamber diameter alone is not the complete opening
Overall height, basket depth and baffle opening are different dimensions. Confirm the complete original drawing and terminal clearances before machining.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Thiele/Small parameters
Values transcribed from the populated original table. Le is measured at 1 kHz. Excitation level is not inferred where the source leaves it unspecified. Blank fields remain unreported.
- Fs · resonance
- 800 Hz
- Qts · total Q
- 0.36
- Qes · electrical Q
- 0.65
- Qms · mechanical Q
- 0.8
- Re · DC resistance
- 5.2 Ω
- Le · inductance
- 0.05 mH
- Sd · piston area
- 6 cm²
- Mms · moving mass
- 0.44 g
Only populated, resolved source fields are listed. These are reference specifications, not measurements of your individual driver.
Sources & availability
Morel product and documentation ↗
Listed in Morel’s raw-driver catalogue. Live stock and the latest production revision require confirmation with Morel.
Original sheet reviewed is undated. Confirm the current revision and full mounting drawing with Morel.