SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Morel SCM 634

Specifications and labelled product photograph checked against the original undated Morel sheet, preserved by its distributor. Confirm the current production revision with Morel; this reference does not establish live stock or complete CAD geometry.

PDF / documentation ↗

Driver specifications

Brand
Morel
Type
Midrange
Nominal size
6 inches
Nominal impedance
4 Ω
Diaphragm material
Carbon fibre / Rohacell sandwich
Overall diameter
160 mm
Baffle cutout
140 mm
Depth behind flange
63 mm
Source checked
15 October 2026

Thiele/Small parameters

Original undated Morel specification sheet. Le measured at 1 kHz. Xmax is one-way linear excursion.

Fs · resonance
49 Hz
Qts · total Q
0.4
Qes · electrical Q
0.59
Qms · mechanical Q
1.32
Vas · equivalent volume
14 L
Re · DC resistance
3.3 Ω
Le · inductance
0.12 mH
Sd · piston area
119 cm²
BL · force factor
4.9 N/A
Mms · moving mass
14.5 g
Cms · compliance
0.733 mm/N
Rms · mechanical resistance
3.36 kg/s
Xmax · linear excursion
5.25 mm
Vd · displacement
Not listed in reviewed source

Published reference values, not measurements of your individual driver.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction & rated performance
Sensitivity
89 dB SPL · 2.83 V / 1 m
Nominal power (manufacturer DIN designation)
150 W; standard number, test band and duration not stated
Transient power
1000 W for 10 ms; distinct from nominal power
Published response
See original response graph; numerical range not tabulated
Voice-coil diameter
75 mm
Coil former / wire
Aluminium former; Hexatech aluminium wire; 2 layers
Magnet system
Hybrid neodymium / ferrite
Net mass
1.42 kg
Chassis
Uniflow die-cast aluminium

Sensitivity conditions differ between models. These published figures are not measurements of an individual unit.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Mounting drawing
Overall diameter
160 mm
Overall height
69 mm
Depth behind flange
63 mm
Flange thickness
6 mm
Mounting-hole location diameter
152 mm
Mounting holes
6 equally spaced; Ø 4.2 mm
Drawing cutout
140 mm

Overall height includes the flange. Confirm the latest original drawing and terminal clearances before machining.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Technical sources

Morel product and documentation ↗

Original sheet is undated. Confirm the latest revision, production status and stock with Morel. No verified CAD resource is available for this exact model.

Search Morel drivers →