SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Morel ET 448

Morel ET 448 tweeter reference from its original specification sheet. Published measurement conditions and exact model geometry are retained; confirm the latest revision with Morel.

PDF / documentation ↗

Driver specifications

Family
Elite
Type
Tweeter
Nominal size / identification
28 mm voice coil; 72 mm faceplate
Nominal impedance
8 Ω
Diaphragm material
Acuflex hand-coated soft dome
Overall diameter
72 mm
Baffle cutout
See original terminal-relief drawing
Overall height
58 mm
Mounting depth
See original drawing and terminal clearance
Source checked
2026-10-16

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Family
Elite
Sensitivity
92 dB SPL; 1 W / 1 m
Nominal power
120 W. Manufacturer DIN designation; standard number, test band and duration are not stated.
Voice-coil diameter
28 mm
Coil former / wire
Aluminium former; Hexatech aluminium wire, two layers
Magnet
Double neodymium
Net mass
0.102 kg
Transient power
1000 W for 10 ms; distinct from nominal power

Power, sensitivity and response retain the original source conditions.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Original mounting dimensions
Overall diameter
72 mm
Overall height D
58 mm
Basket/chamber depth E
55 mm
Flange thickness C
3 mm
Fixing circle
64 mm
Fixing holes
6 equally spaced; 3.4 mm diameter
Baffle opening
See the original terminal-relief drawing; chamber diameter alone is not the complete opening

Overall height, basket depth and baffle opening are different dimensions. Confirm the complete original drawing and terminal clearances before machining.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Thiele/Small parameters

Values transcribed from the populated original table. Le is measured at 1 kHz. Excitation level is not inferred where the source leaves it unspecified. Blank fields remain unreported.

Fs · resonance
750 Hz
Re · DC resistance
5.2 Ω
Le · inductance
0.05 mH
Sd · piston area
6 cm²
BL · force factor
2.3 N/A
Mms · moving mass
0.44 g

Only populated, resolved source fields are listed. These are reference specifications, not measurements of your individual driver.

Sources & availability

Morel product and documentation ↗

Listed in Morel’s raw-driver catalogue. Live stock and the latest production revision require confirmation with Morel.

Original sheet reviewed is undated. Confirm the current revision and full mounting drawing with Morel.

Search Morel drivers →