SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Morel EM 1308

Morel EM 1308 midrange reference from its original specification sheet. Published measurement conditions and exact model geometry are retained; confirm the latest revision with Morel.

PDF / documentation ↗

Driver specifications

Family
Elite
Type
Midrange
Nominal size / identification
2.1 inches — original nominal designation
Nominal impedance
8 Ω
Diaphragm material
Acuflex hand-coated soft dome
Overall diameter
130 mm
Baffle cutout
76 mm
Overall height
80 mm
Mounting depth
See original drawing and terminal clearance
Source checked
2026-10-16

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Family
Elite
Sensitivity
88 dB SPL; 2.83 V / 1 m
Nominal power
200 W. Manufacturer DIN designation; standard number, test band and duration are not stated.
Voice-coil diameter
54 mm
Coil former / wire
Aluminium former; Hexatech aluminium wire, two layers
Magnet
Vented neodymium
Net mass
0.518 kg
Transient power
1000 W for 10 ms; distinct from nominal power

Power, sensitivity and response retain the original source conditions.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Original mounting dimensions
Overall diameter
130 mm
Overall height D
80 mm
Basket/chamber depth E
75 mm
Flange thickness C
5 mm
Fixing circle
118 mm
Fixing holes
6 equally spaced; 3.7 mm diameter
Baffle opening
76 mm as labelled in the drawing

Overall height, basket depth and baffle opening are different dimensions. Confirm the complete original drawing and terminal clearances before machining.

Morel product and documentation ↗ · Original Morel single-page specification sheet; undated

Thiele/Small parameters

Values transcribed from the populated original table. Le is measured at 1 kHz. Excitation level is not inferred where the source leaves it unspecified. Blank fields remain unreported.

Fs · resonance
320 Hz
Qts · total Q
0.47
Qes · electrical Q
1.01
Qms · mechanical Q
0.9
Re · DC resistance
6.2 Ω
Le · inductance
0.2 mH
Sd · piston area
28 cm²
BL · force factor
5.2 N/A
Mms · moving mass
3 g
Xmax · linear excursion
1 mm

Only populated, resolved source fields are listed. These are reference specifications, not measurements of your individual driver.

Sources & availability

Morel product and documentation ↗

Listed in Morel’s raw-driver catalogue. Live stock and the latest production revision require confirmation with Morel.

Original sheet reviewed is undated. Confirm the current revision and full mounting drawing with Morel.

Search Morel drivers →