Morel CAT 328-104
Specifications and labelled product photograph checked against the original undated Morel sheet, preserved by its distributor. Confirm the current production revision with Morel; this reference does not establish live stock or complete CAD geometry.
Manufacturer angled product viewDriver specifications
- Brand
- Morel
- Type
- Tweeter
- Nominal size
- Not tabulated
- Nominal impedance
- 8 Ω
- Diaphragm material
- Coated soft dome
- Overall diameter
- 104 mm
- Baffle cutout
- See terminal-relief drawing
- Depth behind flange
- 43 mm
- Source checked
- 15 October 2026
Thiele/Small parameters
Original undated Morel specification sheet. Le measured at 1 kHz. Blank parameters in the sheet are left unreported.
- Fs · resonance
- 650 Hz
- Qts · total Q
- Not listed in reviewed source
- Qes · electrical Q
- Not listed in reviewed source
- Qms · mechanical Q
- Not listed in reviewed source
- Vas · equivalent volume
- Not listed in reviewed source
- Re · DC resistance
- 5.2 Ω
- Le · inductance
- 0.09 mH
- Sd · piston area
- 6 cm²
- BL · force factor
- 3.5 N/A
- Mms · moving mass
- 0.44 g
- Cms · compliance
- Not listed in reviewed source
- Rms · mechanical resistance
- Not listed in reviewed source
- Xmax · linear excursion
- Not listed in reviewed source
- Vd · displacement
- Not listed in reviewed source
Published reference values, not measurements of your individual driver.
Construction, mounting & original reference
Open a section for documented details and its original source.
Construction & rated performance
- Sensitivity
- 90 dB SPL · 2.83 V / 1 m
- Nominal power (manufacturer DIN designation)
- 200 W; standard number, test band and duration not stated
- Transient power
- 1000 W for 10 ms; distinct from nominal power
- Published response
- See original response graph; numerical range not tabulated
- Voice-coil diameter
- 28 mm
- Coil former / wire
- Aluminium former; Hexatech aluminium wire; 2 layers
- Magnet system
- Vented ferrite
- Net mass
- 0.573 kg
- Dome
- Acuflex hand-coated soft dome
Sensitivity conditions differ between models. These published figures are not measurements of an individual unit.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Mounting drawing
- Overall diameter
- 104 mm
- Overall height
- 46 mm
- Depth behind flange
- 43 mm
- Flange thickness
- 3 mm
- Mounting-hole location diameter
- 94 mm
- Mounting holes
- 6 equally spaced; Ø 3.7 mm
- Baffle opening
- Drawing includes terminal relief around the chamber; do not use chamber diameter as a complete circular cutout.
Overall height includes the flange. Confirm the latest original drawing and terminal clearances before machining.
Morel product and documentation ↗ · Original Morel single-page specification sheet; undated
Technical sources
Morel product and documentation ↗Original sheet is undated. Confirm the latest revision, production status and stock with Morel. No verified CAD resource is available for this exact model.