JBL LE14A · SB1212
JBL LE14A SB1212 vintage reference: original Lans-a-loy suspension, mounting arrangement, enclosure guidance and associated HF components.
Driver specifications
- Brand
- JBL
- Type
- Woofer
- Nominal size
- 14 inches — nominal
- Nominal impedance
- 8–16 Ω as printed; electrical variant unresolved
- Original document
- JBL Bulletin SB1212; archive dates it circa 1960 (approximate)
- Power input / capacity
- 30 W power capacity with proper acoustic load. The bulletin gives no AES/RMS or continuous-program test standard.
- Voice-coil diameter
- 101.6 mm. Converted from 4 inches; edgewound copper ribbon
- Overall diameter
- 352.425 mm
- Front / listed baffle opening
- 315.11875 mm. Front-mount baffle opening from Bulletin SB1212; rear mounting has a different opening.
- Rear-mount baffle opening
- 307.975 mm
- Mounting bolt circle
- 337.34375 mm
- Overall depth
- 133.35 mm. Overall depth in the table; the mounting reference plane is not separately defined.
- Mounting depth behind flange
- Not established from this source
- Maximum recommended crossover
- 1500 Hz. Published upper recommendation, not a minimum safe crossover or a complete crossover design.
- Shipping weight
- 21 lb. Shipping weight in the table; not the driver net mass.
- Source checked
- 2026-10-16
Original inch dimensions converted at 25.4 mm/in. Conversion decimals do not imply a manufacturing tolerance. Front and rear cutouts are different. Overall depth is distinct from an unverified behind-flange mounting depth.
The bulletin describes direct front mounting and a separate rear-mount opening; confirm the original mounting arrangement before machining.
Construction, mounting & original reference
Open a section for documented details and its original source.
Original suspension and mounting
- Frame
- Cast aluminium
- Suspension
- Lans-a-loy ring at the cone edge
- Coil
- 4-inch edgewound copper ribbon
- Mounting arrangement
- Direct front mounting is described; a different opening is listed for rear mounting.
The suspension material is not the cone material. Front/rear openings and overall depth retain their original conditions.
Source documentation ↗ · SB1212, page 2
Historical enclosure and system context
- Enclosure reference
- Original literature allows enclosures as small as 1.6 cubic feet (about 45.3 L); alignment and net-volume convention are not stated.
- Associated original HF parts
- LE175 or LE20 high-frequency drivers with appropriate horns and dividing networks
- Impedance label
- 8–16 ohms as printed; separate electrical versions are not established by this bulletin
These are historical examples, not current replacement recommendations or T/S-optimised designs. Match original network, horn and driver revisions.
Source documentation ↗ · SB1212, page 2
Thiele/Small parameters
Historical T/S values in the original bulletin have not been corroborated in a second credible source for this exact revision; they remain withheld. No values are inferred from photographs or modern replacements.
Technical sources & availability
Original JBL bulletin at Lansing Heritage ↗
Out-of-production historical reference. Used-unit availability, original parts and reconing require individual confirmation.
The original bulletin remains at its external source. Confirm the exact original unit, mounting arrangement and drawing before machining.