JBL E145 16Ω
JBL E145 16Ω woofer reference (16 Ω): historical ratings, measurement conditions and external documentation.
Driver specifications
- Driver type
- Woofer
- Nominal size
- 15 in
- Impedance
- 16 Ω
- Baffle cutout
- 355 mm — Front mounting. Rear-mount cutout differs on some models; inspect the original table.
- Depth
- 160 mm — Overall depth in the catalogue.
- Published range
- 40–2500 Hz — Approximate frequency limits at −10 dB; not a flat-response or enclosure F3 specification.
- Sensitivity
- 98 dB SPL — 1 W / 1 m, on axis in a hemispherical free field; input swept 500–2500 Hz; catalogue tolerance ±1 dB.
- Published power
- 300 W — Continuous programme rating; the catalogue defines programme power as twice its continuous sine-wave rating. Sine-wave capacity uses a one-hour swept test around minimum impedance. These are not AES noise ratings.
- Continuous sine-wave capacity
- 150 W — see the separate programme rating and test conditions above.
- Voice-coil diameter
- 102 mm
- Document revision
- JBL Professional Products catalogue, 1982, page 15
Original JBL catalogue reference, with the electrical variant and published measurement conditions kept separate. A repaired or reconed unit may differ from these historical ratings.
Thiele/Small parameters & excursion
Historical T/S values are not published here without two credible corroborating sources for the exact variant. Dimensions below are reference measurements, not complete CAD geometry.
Availability & original sources
Historical model listed in the 1982 JBL catalogue. Current used-unit availability and condition are not tracked.
Original technical reference ↗Source checked 2026-10-06. Manufacturer drawings, photographs and datasheets remain at their external sources.
Search & compare JBL drivers →
Design a crossover from measured response → · Explore cabinet calculators →