JBL D130 · 15 Ω (circa 1948)
Early 15 Ω D-130 wideband driver reference, with a cast aluminium frame, Alnico V motor and aluminium ribbon voice coil. This is distinct from later D130 impedances and the D130F. The flyer provides no complete frequency-response range or standardised sensitivity value.
Driver specifications
- Brand
- JBL
- Type
- Full-range
- Nominal size
- 15 inches
- Nominal impedance
- 15 Ω
- Document revision
- Original D-130 flyer; archive dates it circa 1948 (approximate)
- Source checked
- 2026-10-06
- Power input / program rating
- 20 W power input; the flyer does not specify a test method. Not labelled RMS, AES or continuous program.
- Nominal voice-coil diameter
- 101.6 mm. Converted from 4 inches; aluminium ribbon coil
- Overall frame diameter
- 385.7625 mm
- Baffle cutout
- Not listed in reviewed source
- Overall depth
- 142.875 mm. Converted from the published 5⅝-inch depth; mounting reference plane is not explicitly stated.
Outside diameter converted from 15³⁄₁₆ inches at 25.4 mm/in. Extra decimal places reflect conversion only, not manufacturing tolerance. The flyer gives no numerical baffle cutout or bolt circle.
Thiele/Small parameters
Historical T/S parameters are withheld until the exact version is corroborated in two credible sources. No values are inferred from photographs or another variant.
Technical sources & availability
Original JBL technical document at Lansing Heritage ↗
Out-of-production historical reference. Used-market stock, condition, reconing and original components require individual confirmation.
Documents remain hosted by the external archive. No original scans, manufacturer photographs, PDF files or CAD files are redistributed here. Confirm the exact original unit and drawing before machining.