JBL 2470
Original 1982 JBL 2470 16 Ω compression-driver reference with an Alnico V motor, phenolic-impregnated linen diaphragm and edgewound aluminium coil. Horn and tube sensitivity, net driver mass and magnetic assembly mass are identified separately.
Driver specifications
- Brand
- JBL
- Type
- Compression driver
- Nominal impedance
- 16 Ω
- Document revision
- JBL Professional Products catalogue, 1982, page 19
- Magnet material
- Alnico V
- Diaphragm material
- Phenolic-impregnated linen
- Voice-coil material / construction
- Aluminium / Edgewound ribbon
- Voice-coil diameter
- 44 mm — rounded metric nominal value
- Horn throat diameter
- 25 mm — rounded metric nominal value
- Continuous-program power
- 50 W. Continuous-program rating from the 1982 catalogue at its listed minimum crossover; not an AES/RMS or thermal test rating.
- Horn sensitivity
- 110 dB SPL. 1 W / 1 m, measured on axis from the mouth of a JBL 2350 90° radial horn (nominal Q 6.3); input swept from the lowest recommended crossover to 2500 Hz. Horn-dependent rating.
- Terminated-tube sensitivity
- 117 dB SPL in a 25 mm (1 inch) terminated plane-wave tube, using 1 mW input swept from the lowest recommended crossover to 2.5 kHz. Separate from the horn-dependent 1 W / 1 m rating.
- Tube-test voltage
- 0.126 V into 16 Ω for the stated 1 mW test
- Published frequency range
- 500–12000 Hz. Approximate frequency limits at −10 dB; not a flat-response or enclosure F3 specification.
- Lowest recommended crossover
- 500 Hz. Original lowest recommended crossover; the attached horn and filter must also be checked. Continuous-program power is not an AES/RMS rating.
- Overall diameter
- 146 mm
- Overall depth
- 98 mm
- Mounting depth behind flange
- Not established from this source
- Magnetic assembly mass
- 4.5 kg
- Net driver mass
- 5 kg. Net driver mass and magnetic assembly mass are separate original catalogue values, not shipping mass or moving mass Mms.
- Magnetic gap flux density
- 1.5 T. Original magnetic-gap flux density in tesla; not the T/S force factor BL.
- Source checked
- 2026-10-08
Rounded metric overall dimensions from the 1982 catalogue. Overall depth is not verified behind-flange mounting depth. Horn attachment geometry requires an original drawing.
The model-specific catalogue narrative identifies phenolic-impregnated linen diaphragms for 2461, 2470 and 2482. Aluminium in the specification table is explicitly the voice-coil material, not the diaphragm; these statements do not conflict.
Thiele/Small parameters
No independently corroborated complete historical T/S dataset has been established for this exact 1982 variant. Net mass and magnetic assembly mass are not moving mass Mms; gap flux density is not BL. No T/S values are inferred.
Availability & original sources
Historical model listed in the 1982 JBL catalogue. Current used-unit availability and condition are not tracked.
Original technical reference ↗Source checked 2026-10-08. Manufacturer drawings, photographs and datasheets remain at their external sources.
Search & compare JBL drivers →
Design a crossover from measured response → · Explore cabinet calculators →