JBL 2440
Original August 1977 JBL 2440 16 Ω compression-driver reference, with an Alnico V motor and edgewound aluminium ribbon coil. Ratings and dimensions apply to this historical sheet; later versions and reconed units may differ.
Driver specifications
- Brand
- JBL
- Type
- Compression driver
- Nominal impedance
- 16 Ω
- Document revision
- JBL PPB 2440-8/77 (August 1977)
- Diaphragm material
- Aluminium alloy
- Continuous program rating
- 60 W continuous program in this historical sheet; not an AES/RMS rating
- Sensitivity
- 118 dB SPL in a terminated 1-inch-diameter tube with 1 mW input, signal warbled from 500–2500 Hz. Not a free-field 1 W / 1 m rating.
- Published frequency range
- 500–12000 Hz. Frequency range in the specification table, without an associated flatness tolerance. Horn-loaded and terminated-tube response limits differ.
- Minimum recommended crossover
- 500 Hz. Minimum recommended crossover frequency in the original sheet; the horn and filter configuration must be checked separately.
- Voice-coil diameter
- 102 mm. Published rounded metric nominal value (10.2 cm / 4 inches); edgewound aluminium ribbon
- Horn throat diameter
- 51 mm. Published rounded metric nominal value (5.1 cm / 2 inches)
- Overall diameter
- 178 mm
- Overall depth
- 136 mm
- Mounting depth behind flange
- Not listed in reviewed source
- Baffle cutout
- Not applicable as a direct-radiator baffle opening; horn mounting drawing required
- Source checked
- 2026-10-07
Overall diameter 17.8 cm and overall depth 13.6 cm are the rounded metric values in the original table. Horn mounting geometry and behind-flange depth are not specified.
The printed footnote gives 0.126 V into 16 ohms for the 1 mW tube measurement.
Thiele/Small parameters
No complete, independently corroborated historical Thiele/Small dataset has been established for this exact revision. No T/S values are inferred from the response plot or another driver.
Technical sources
View original technical reference ↗Historical technical reference. Original used-driver stock and condition have not been verified; confirm the exact variant with a seller.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.