JBL 2405
Original Alnico V slot-radiator tweeter, exact 16 Ω version in JBL’s 1975 literature. This record does not describe the later 2405H or an 8 Ω replacement diaphragm. The legacy sensitivity figure retains its 1 mW / 30-foot condition.
Driver specifications
- Brand
- JBL
- Type
- Tweeter
- Collection
- Vintage reference
- Exact nominal impedance
- 16 Ω
- Diaphragm material
- Aluminium alloy
- Continuous program power
- 20 W continuous program, original table. Its footnote defines program as 3 dB above continuous sine-wave RMS power; this is not an AES or modern continuous pink-noise rating. The architectural paragraph describes a different pink-noise test; do not interchange those definitions.
- Sensitivity
- 56 dB SPL at 30 feet with 1 mW, using warbled signal over 7–20 kHz. This legacy figure is not dB at 1 W / 1 m.
- Frequency range
- 6500–21500 Hz. Original specification-table limits; architectural paragraph separately describes 7–20 kHz ±3 dB at at least 6 feet in a free field
- Recommended crossover
- 7 kHz or higher
- Dispersion
- 90° horizontal × 30° vertical at 16 kHz; 65° × 25° at 20 kHz. −6 dB points with one-third-octave pink noise; wide coverage plane perpendicular to the horn slot.
- Overall diameter
- 98 mm
- Baffle cutout
- 79 mm
- Overall depth
- 83 mm
- Mounting depth behind flange
- Not separately listed in the reviewed specification table
- Voice-coil diameter
- 1.75 inches; original metric figure rounded to 4.4 cm
- Diaphragm thickness
- 0.056 mm aluminium alloy
- Net weight
- 2 kg
- Source revision
- JBL PPB2405/75 · original 1975 16 Ω version
- Source checked
- 2026-10-06
The original table rounds metric dimensions to 9.8 cm diameter, 8.3 cm overall depth and 7.9 cm baffle cutout (98 / 83 / 79 mm). Its parallel inch figures are 3⅞ / 3¼ / 3⅛ inches; rounded metric values are not machining tolerances. Behind-flange mounting depth is not separately verified.
Thiele/Small parameters
The reviewed original document does not provide a complete Thiele/Small parameter set. No historical T/S values have been added without two credible corroborating sources.
CAD access
No verified CAD resource is available for this exact historical variant.
Technical sources
View original technical reference ↗Out-of-production historical reference. Used stock, original diaphragm and condition must be confirmed with a seller.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.