JBL 2402H
Ferrite-motor annular tweeter, exact 8 Ω 2402H revision documented in January 1983. Its 40 W program rating and 110 dB sensitivity retain the original test definitions; specifications are not substituted from the older 075.
Driver specifications
- Brand
- JBL
- Type
- Tweeter
- Collection
- Vintage reference
- Exact nominal impedance
- 8 Ω
- Diaphragm material
- Aluminium alloy
- Continuous program power
- 40 W continuous program. JBL defines program as 3 dB above continuous pink-noise power; pink-noise test uses 6 dB crest factor, high-pass filtering at the specified lower frequency and a two-hour duration.
- Sensitivity
- 110 dB SPL, 1 W / 1 m, averaged over 5–20 kHz
- Frequency range
- 2500–15000 Hz. −10 dB limits; separately specified response is 3–15 kHz ±3 dB
- Recommended crossover
- 2.5 kHz or higher
- Dispersion
- 40° conical at 10 kHz; −6 dB coverage points with one-third-octave pink noise
- Overall diameter
- 121 mm
- Baffle cutout
- 79 mm
- Overall depth
- 98 mm
- Mounting depth behind flange
- Not separately listed in the reviewed specification table
- DC resistance reference
- 6.25 Ω ±10% at 25 °C; single original source
- Voice-coil diameter
- 44 mm
- Diaphragm thickness
- 0.056 mm aluminium alloy
- Net weight
- 2.3 kg
- Source revision
- JBL SS2402H/1-83 P639 · January 1983
- Source checked
- 2026-10-06
121 mm overall diameter, 79 mm baffle cutout and 98 mm overall depth are listed in the original specification table. Overall depth is not a separately verified mounting depth behind the flange. The 79 mm horn mouth diameter is also listed; nominal driver size is not inferred from it.
Thiele/Small parameters
The reviewed original document does not provide a complete Thiele/Small parameter set. No historical T/S values have been added without two credible corroborating sources.
The source lists DC resistance as 6.25 Ω ±10% at 25 °C. It is retained as an original electrical reference, with historical T/S corroboration still pending.
CAD access
No verified CAD resource is available for this exact historical variant.
Technical sources
View original technical reference ↗Out-of-production historical reference. Used stock, original diaphragm and condition must be confirmed with a seller.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.