SpeakerFoundry
VINTAGE DRIVER REFERENCE

JBL 2231

JBL 2231 woofer reference. Checked specification facts, historical technical sources and CAD access status.

PDF / documentation ↗

Driver specifications

Brand
JBL
Type
Woofer
Nominal size
15 inches
Nominal impedance
8 Ω
Document revision
JBL PPB2231-1/78 (January 1978)
Source checked
2026-10-06
Power input / program rating
100 W continuous program in January 1978 sheet; not an AES rating
Sensitivity
93 dB SPL at 1 m with 1 W input; swept signal from 100–500 Hz, on axis
Published frequency range
25–2000 Hz. Published frequency range; no flat-response tolerance inferred.
Maximum recommended crossover
800 Hz. Highest recommended crossover frequency; not a minimum safe crossover.
Nominal voice-coil diameter
100 mm. Published nominal metric diameter; edgewound copper ribbon
Overall frame diameter
Not listed in reviewed source
Baffle cutout
355 mm. Front mounting; metric value in the original table
Depth
Withheld — Withheld: architectural text states 145 mm; specification table states 146 mm, both alongside 5¾ inches.
Rear-mounting cutout
343 mm

Front and rear cutouts are distinct. Depth remains withheld because the same original document has conflicting metric values.

Used in loudspeaker

Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.

No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.

These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.

Thiele/Small parameters

T/S values in the January 1978 sheet have not yet been corroborated by a second credible source for this exact no-suffix variant; they remain withheld.

CAD origin and access

No verified CAD resource

No-suffix 2231, 8 Ω, as identified in the January 1978 JBL technical sheet. Alnico V motor, cast aluminium frame and edgewound copper ribbon voice coil. Do not substitute 2231A or later models.

No verified CAD link is offered for this record.

Technical sources

JBL PPB2231-1/78 (January 1978) ↗

View original technical reference ↗

Historical technical reference. Original used-driver stock and condition have not been verified; confirm the exact variant with a seller.

Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.

Search JBL drivers →