SpeakerFoundry
VINTAGE DRIVER REFERENCE

JBL 2225H

JBL 2225H woofer reference. Checked specification facts, historical technical sources and CAD access status.

PDF ↗

Driver specifications

Brand
JBL
Type
Woofer
Nominal size
15 inches
Nominal impedance
8 Ω
Document revision
Ratings and overall depth: JBL Professional catalogue (1982), component table
Source checked
2026-10-06
Power input / program rating
400 W continuous program in the 1982 catalogue; distinct from sine-wave and AES ratings
Sine-wave rating
200 W continuous sine-wave rating in the 1982 catalogue; not an AES test
Sensitivity
97 dB SPL at 1 m with 1 W input; swept signal from 100–500 Hz
Published frequency range
30–2000 Hz. Published frequency range in the original 1982 component table; not a flat-response guarantee.
Nominal voice-coil diameter
100 mm. Published nominal metric diameter
Overall frame diameter
Not listed in reviewed source
Baffle cutout
Not listed in reviewed source
Overall depth
137 mm. Overall depth in the 1982 component table; behind-flange depth not separately stated

The 1982 table lists overall depth. Frame diameter, baffle cutout and mounting plane are not inferred.

Used in loudspeaker

Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.

No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.

These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.

Thiele/Small parameters

Matching published values checked in two distinct JBL publications: the 2004 parameter list and Technical Note 1/3A, Table V. Both are externally archived original JBL documents, not independent measurements. Only matching Fs, Qts, Qms, Qes, Re, Le, BL and Mms are published here. Vas, Sd and Xmax differ in precision or revision and remain unverified. Reconing, ageing and repairs may alter actual parameters.

Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.

Fs · resonance
40 Hz
Qts · total Q
0.28
Qes · electrical Q
0.31
Qms · mechanical Q
2.5
Vas · equivalent volume
Conflicting source values
Re · DC resistance
6.3 Ω
Le · inductance
1.1 mH
Sd · piston area
Conflicting source values
BL · force factor
23 N/A
Mms · moving mass
105 g
Cms · compliance
Awaiting source review
Rms · mechanical resistance
Awaiting source review
Xmax · linear excursion
Conflicting source values
Vd · displacement
Awaiting source review
Corroborating parameter sources

JBL Professional parameter list, 12 January 2004 ↗ · 2235H: page 4; 2225H: page 3

JBL Technical Note Volume 1, Number 3A, Table V ↗ · 2235H: page 9; 2225H: page 8

Check the source revision and measurement conditions before design. Open original parameter source ↗

CAD origin and access

No verified CAD resource

Exact 2225H variant. Numerical T/S values corroborated across two original JBL publications; no complete geometry or new CAD model is asserted.

No verified CAD link is offered for this record.

Technical sources

JBL Professional catalogue, 1982 — Low-frequency component table, archive page 17 ↗

View original technical reference ↗

Historical technical reference. Used-driver availability, original parts and condition require confirmation.

Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.

Search JBL drivers →