FaitalPRO 8FE200 (8 Ω)
FaitalPRO 8FE200 (8 Ω) woofer reference. 8 ohm. Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- FaitalPRO
- Type
- Woofer
- Collection
- Manufacturer catalogue
- Nominal size
- 8 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- See source
- Overall diameter
- 209.2 mm
- Baffle cutout
- Conflicting source values
- Mounting depth behind flange
- Awaiting source review
- Resonance (Fs)
- 80 Hz
- Total Q (Qts)
- 0.63
- Equivalent volume (Vas)
- 16.1 litres
- Source checked
- 2026-10-03
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
Published Xmax includes the manufacturer’s magnetic-gap allowance; it is not simply half the coil overhang. See the original datasheet for the definition. Overall depth is not relabelled as mounting depth. Cutout is withheld because the manufacturer table and drawing differ.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 80 Hz
- Qts · total Q
- 0.63
- Qes · electrical Q
- 0.66
- Qms · mechanical Q
- 13
- Vas · equivalent volume
- 16.1 L
- Re · DC resistance
- 5.9 Ω
- Le · inductance
- 0.44 mH
- Sd · piston area
- 209 cm²
- BL · force factor
- 8.2 N/A
- Mms · moving mass
- 15 g
- Cms · compliance
- 0.26 mm/N
- Rms · mechanical resistance
- 0.6 kg/s
- Xmax · linear excursion
- 4.67 mm
- Vd · displacement
- Awaiting source review
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
No verified CAD resource
Original manufacturer specifications. Complete geometry is unverified; no CAD file is hosted or offered.
No verified CAD link is offered for this record.
Technical sources
Open manufacturer PDF ↗Manufacturer technical reference. Confirm production status, revision and distributor stock before purchasing.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.