Eminence DELTA-12LFA
Eminence DELTA-12LFA woofer reference. 8 ohm. Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- Eminence
- Type
- Woofer
- Collection
- Manufacturer catalogue
- Nominal size
- 12 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- Paper
- Overall diameter
- 305.6 mm
- Baffle cutout
- 281.2 mm
- Mounting depth behind flange
- 135.9 mm
- Resonance (Fs)
- 51 Hz
- Total Q (Qts)
- 0.47
- Equivalent volume (Vas)
- 67.9 litres
- Source checked
- 2026-10-03
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
Manufacturer product specification table reviewed for this exact impedance variant. Published small-signal values may change with manufacturing revision and actual driver condition.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 51 Hz
- Qts · total Q
- 0.47
- Qes · electrical Q
- 0.51
- Qms · mechanical Q
- 7.28
- Vas · equivalent volume
- 67.9 L
- Re · DC resistance
- 6.06 Ω
- Le · inductance
- 1.45 mH
- Sd · piston area
- 506.7 cm²
- BL · force factor
- 14.1 N/A
- Mms · moving mass
- 51 g
- Cms · compliance
- 0.19 mm/N
- Rms · mechanical resistance
- Not listed in reviewed source
- Xmax · linear excursion
- 4.8 mm
- Vd · displacement
- 243 cm³
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
No verified CAD resource
Specifications from the exact-variant manufacturer product page. Documentation and photographs open externally; no supplier photo, PDF or CAD file is hosted.
No verified CAD link is offered for this record.
Technical sources
Open manufacturer PDF ↗Manufacturer dealer catalogue entry; direct webshop showed sold out at review. Confirm stock with an authorised dealer.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.