Dayton Audio UMII8-22
Dayton Audio UMII8-22 subwoofer reference. 2 Ω per coil (dual voice coil). Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- Dayton Audio
- Type
- Subwoofer
- Collection
- Manufacturer catalogue
- Nominal size
- 8 inches
- Nominal impedance
- 2 Ω per coil (dual voice coil)
- Diaphragm material
- Carbon Fiber
- Overall diameter
- Awaiting source review
- Baffle cutout
- Awaiting source review
- Mounting depth behind flange
- Awaiting source review
- Resonance (Fs)
- 46 Hz
- Total Q (Qts)
- 0.75
- Equivalent volume (Vas)
- 8.4 litres
- Source checked
- 2026-10-02
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
Dual voice-coil model. Confirm series/parallel measurement wiring and Xmax definition in the manufacturer datasheet before using these published parameters.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 46 Hz
- Qts · total Q
- 0.75
- Qes · electrical Q
- 0.99
- Qms · mechanical Q
- 3.1
- Vas · equivalent volume
- 8.4 L
- Re · DC resistance
- 3.9 Ω
- Le · inductance
- 0.75 mH
- Sd · piston area
- 200 cm²
- BL · force factor
- 9.7 N/A
- Mms · moving mass
- 82 g
- Cms · compliance
- 0.148 mm/N
- Rms · mechanical resistance
- Awaiting source review
- Xmax · linear excursion
- 18 mm
- Vd · displacement
- 360 cm³
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
No verified CAD resource
Manufacturer product-table reference. Mounting geometry is withheld pending original drawing review; overall depth is not treated as mounting depth. Dual voice coils: nominal impedance is per coil. Published T/S values must be used with the measurement wiring specified in the manufacturer datasheet; they are not certified as single-coil parameters.
No verified CAD link is offered for this record.
Technical sources
View manufacturer documentation ↗Listed in the manufacturer catalogue. Confirm the exact revision, production status and distributor stock before purchasing.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.