SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Dayton Audio SS8-22

Dayton Audio SS8-22 subwoofer reference. 2 Ω per coil (dual voice coil). Checked specification facts, manufacturer documentation and CAD access status.

PDF / documentation ↗

Driver specifications

Brand
Dayton Audio
Type
Subwoofer
Collection
Manufacturer catalogue
Nominal size
8 inches
Nominal impedance
2 Ω per coil (dual voice coil)
Diaphragm material
Aluminum
Overall diameter
Awaiting source review
Baffle cutout
Awaiting source review
Mounting depth behind flange
Awaiting source review
Resonance (Fs)
38 Hz
Total Q (Qts)
0.45
Equivalent volume (Vas)
9.7 litres
Source checked
2026-10-02

Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.

Used in loudspeaker

Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.

No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.

These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.

Thiele/Small parameters

Dual voice-coil model. Confirm series/parallel measurement wiring and Xmax definition in the manufacturer datasheet before using these published parameters.

Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.

Fs · resonance
38 Hz
Qts · total Q
0.45
Qes · electrical Q
0.5
Qms · mechanical Q
4.37
Vas · equivalent volume
9.7 L
Re · DC resistance
4.4 Ω
Le · inductance
1.6 mH
Sd · piston area
200 cm²
BL · force factor
14.6 N/A
Mms · moving mass
101 g
Cms · compliance
0.17 mm/N
Rms · mechanical resistance
Awaiting source review
Xmax · linear excursion
17 mm
Vd · displacement
325 cm³

Check the source revision and measurement conditions before design. Open original parameter source ↗

CAD origin and access

No verified CAD resource

Manufacturer product-table reference. Mounting geometry is withheld pending original drawing review; overall depth is not treated as mounting depth. Dual voice coils: nominal impedance is per coil. Published T/S values must be used with the measurement wiring specified in the manufacturer datasheet; they are not certified as single-coil parameters.

No verified CAD link is offered for this record.

Technical sources

View manufacturer documentation ↗

Listed in the manufacturer catalogue. Confirm the exact revision, production status and distributor stock before purchasing.

Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.

Search Dayton Audio drivers →