Beyma 8MI100 · 8 Ω
Eight-inch midrange reference with a ferrite motor and 50.8 mm voice coil. The official datasheet includes on-axis and 45° response curves; inspect those before choosing a crossover frequency.
Driver specifications
- Brand
- Beyma
- Type
- Midrange
- Nominal size
- 8 inches / 200 mm
- Nominal impedance
- 8 Ω
- Minimum impedance
- 7.6 Ω
- Power capacity
- 250 W AES; AES2-1984 (r2003) test stated in the linked datasheet.
- Program power
- 500 W program; defined as power capacity +3 dB in the linked PDF.
- Sensitivity
- 96 dB SPL, 1 W / 1 m at nominal impedance. PDF response measured on an infinite baffle in an anechoic chamber.
- Published frequency range
- 100–7000 Hz
- Voice-coil diameter
- 50.8 mm
- Overall frame
- 212 mm
- Front-mount cutout
- 181 mm
- Mounting bolt circle
- 198 mm
- Overall depth
- 94 mm
- Mounting depth behind flange
- Not separately verified
- Source revision
- Exact 8 Ω official reference; linked PDF revision 06/18
- Source checked
- 2026-10-06
PDF mounting table and drawing agree: 212 mm outer frame, 198 mm bolt circle, 181 mm front cutout and 94 mm overall depth. Overall depth is not entered as behind-flange mounting depth.
Thiele/Small parameters
- Fs · resonance
- 90 Hz
- Qts · total Q
- 0.45
- Qes · electrical Q
- 0.48
- Qms · mechanical Q
- 7.5
- Vas · equivalent volume
- 12 L
- Re · DC resistance
- 6 Ω
- Le · inductance at 1 kHz
- 0.2 mH
- Sd · piston area
- 220 cm²
- BL · force factor
- 11.5 N/A
- Mms · moving mass
- 19 g
- Cms · compliance
- 0.175 mm/N
- Rms · mechanical resistance
- 1.4 kg/s
- Xmax · manufacturer definition
- 3 mm
- Vd · published displacement
- 66 cm³
Cms converted from 175 µm/N to 0.175 mm/N; Sd from 0.022 m² to 220 cm²; Mms from 0.019 kg to 19 g. Shipping weight differs between page and PDF and is not entered. Beyma specifies preconditioning before T/S measurement, using a velocity-current laser transducer. Le is listed at 1 kHz on the product page. Published Xmax uses (voice-coil length − air-gap height)/2 + air-gap height/3.5. These reference parameters do not replace measurements of an individual unit.
Technical sources & availability
Beyma exact-variant product page ↗ · Beyma linked datasheet ↗
Listed in the official global manufacturer catalogue. Confirm production and regional stock with Beyma or its reseller.
Data may change without notice. Check the exact source revision and original drawing before machining or purchasing.
