Beyma 8BR40/N · 8 Ω
Beyma 8BR40/N · 8 Ω woofer reference. 8 ohm. Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- Beyma
- Type
- Woofer
- Collection
- Manufacturer catalogue
- Nominal size
- 8 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- See source
- Overall diameter
- Awaiting source review
- Baffle cutout
- Awaiting source review
- Mounting depth behind flange
- Awaiting source review
- Resonance (Fs)
- 30 Hz
- Total Q (Qts)
- 0.39
- Equivalent volume (Vas)
- 89.1 litres
- Source checked
- 2026-10-03
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
Beyma product table checked. Cms converted from 1300 µm/N to 1.3 mm/N; Sd from 0.022 m² to 220 cm²; moving mass from 0.021 kg to 21 g. Xmax follows the manufacturer definition.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 30 Hz
- Qts · total Q
- 0.39
- Qes · electrical Q
- 0.48
- Qms · mechanical Q
- 2.1
- Vas · equivalent volume
- 89.1 L
- Re · DC resistance
- 5.5 Ω
- Le · inductance
- 0.5 mH
- Sd · piston area
- 220 cm²
- BL · force factor
- 6.8 N/A
- Mms · moving mass
- 21 g
- Cms · compliance
- 1.3 mm/N
- Rms · mechanical resistance
- 2 kg/s
- Xmax · linear excursion
- 6.7 mm
- Vd · displacement
- 147 cm³
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
No verified CAD resource
Specifications from the exact-variant manufacturer product page. Approved Beyma product photograph shown with credit; PDF and CAD access remains external.
No verified CAD link is offered for this record.
Technical sources
Open manufacturer PDF ↗Manufacturer catalogue entry; live stock and production status must be confirmed with the supplier.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.
