SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Beyma 6P200Fe · 8 Ω

6.5-inch, 8 Ω low-frequency driver with a ferrite motor, weatherproof paper cone and rubber surround. Its 8 Ω electrical parameters are kept separate from the 16 Ω version.

PDF ↗Manufacturer ↗

Driver specifications

Brand
Beyma
Type
Woofer
Nominal size
6.5 inches / 165 mm
Nominal impedance
8 Ω
Minimum impedance
5.9 Ω
Power capacity
200 W AES; AES2-1984 (r2003) test stated in the linked datasheet.
Program power
400 W program; defined as power capacity +3 dB in the linked PDF.
Sensitivity
93 dB SPL, 1 W / 1 m at nominal impedance. PDF response measured on an infinite baffle in an anechoic chamber.
Published frequency range
60–9000 Hz
Voice-coil diameter
50.8 mm
Overall frame
187.5 mm
Front-mount cutout
145.3 mm
Mounting bolt circle
172 mm
Overall depth
Withheld: conflicting source values
Mounting depth behind flange
Not separately verified
Source revision
Exact 8 Ω official reference; linked PDF revision 11/20
Source checked
2026-10-06

PDF mounting table and drawing show 187.5 mm overall frame, 172 mm bolt circle and 145.3 mm front cutout. Overall depth is withheld: PDF says 87 mm, product page 87.5 mm. Behind-flange depth is not verified.

Thiele/Small parameters

Fs · resonance
58 Hz
Qts · total Q
0.26
Qes · electrical Q
0.27
Qms · mechanical Q
4.6
Vas · equivalent volume
11.1 L
Re · DC resistance
4.9 Ω
Le · inductance at 1 kHz
0.3 mH
Sd · piston area
135 cm²
BL · force factor
10.5 N/A
Mms · moving mass
17 g
Cms · compliance
0.429 mm/N
Rms · mechanical resistance
1.4 kg/s
Xmax · manufacturer definition
5 mm
Vd · published displacement
68 cm³

Cms converted from 429 µm/N to 0.429 mm/N; Sd from 0.0135 m² to 135 cm²; Mms from 0.017 kg to 17 g. Published Vd is rounded to 68 cm³. The datasheet’s feature bullet says 94 dB, whereas its technical table and product page give 93 dB; the displayed value uses that table. The manufacturer’s 9 L / 74 Hz bass-reflex example is not a universal alignment. Beyma specifies preconditioning before T/S measurement, using a velocity-current laser transducer. Le is listed at 1 kHz on the product page. Published Xmax uses (voice-coil length − air-gap height)/2 + air-gap height/3.5. These reference parameters do not replace measurements of an individual unit.

Technical sources & availability

Beyma exact-variant product page ↗ · Beyma linked datasheet ↗

Listed in the official global manufacturer catalogue. Confirm production and regional stock with Beyma or its reseller.

Data may change without notice. Check the exact source revision and original drawing before machining or purchasing.

Search Beyma references →