SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Beyma 6P200Fe · 16 Ω

6.5-inch, 16 Ω low-frequency driver with a ferrite motor, waterproof paper cone and rubber surround. Its resonance, resistance and excursion values differ from the 8 Ω version.

PDF ↗Manufacturer ↗

Driver specifications

Brand
Beyma
Type
Woofer
Nominal size
6.5 inches / 165 mm
Nominal impedance
16 Ω
Minimum impedance
11.8 Ω
Power capacity
200 W AES; AES2-1984 (r2003) test stated in the linked datasheet.
Program power
400 W program; defined as power capacity +3 dB in the linked PDF.
Sensitivity
93 dB SPL, 1 W / 1 m at nominal impedance. PDF response measured on an infinite baffle in an anechoic chamber.
Published frequency range
70–9000 Hz
Voice-coil diameter
50.8 mm
Overall frame
187.5 mm
Front-mount cutout
146 mm
Mounting bolt circle
172 mm
Overall depth
Withheld: conflicting source values
Mounting depth behind flange
Not separately verified
Source revision
Exact 16 Ω official reference; linked PDF revision 01/19
Source checked
2026-10-06

Exact 16 Ω PDF mounting table: 187.5 mm overall frame, 172 mm bolt circle and 146 mm front cutout. This is not substituted with the 8 Ω drawing’s 145.3 mm. Overall depth is withheld: PDF says 87 mm, product page 87.5 mm. Behind-flange depth is not verified.

Thiele/Small parameters

Fs · resonance
66 Hz
Qts · total Q
0.35
Qes · electrical Q
0.38
Qms · mechanical Q
4.3
Vas · equivalent volume
8.8 L
Re · DC resistance
9.9 Ω
Le · inductance at 1 kHz
0.3 mH
Sd · piston area
135 cm²
BL · force factor
13.6 N/A
Mms · moving mass
16 g
Cms · compliance
0.343 mm/N
Rms · mechanical resistance
1.6 kg/s
Xmax · manufacturer definition
4 mm
Vd · published displacement
54 cm³

Cms converted from 343 µm/N to 0.343 mm/N; Sd from 0.0135 m² to 135 cm²; Mms from 0.016 kg to 16 g. Values come from the separate 16 Ω datasheet, not the 8 Ω model. Beyma specifies preconditioning before T/S measurement, using a velocity-current laser transducer. Le is listed at 1 kHz on the product page. Published Xmax uses (voice-coil length − air-gap height)/2 + air-gap height/3.5. These reference parameters do not replace measurements of an individual unit.

Technical sources & availability

Beyma exact-variant product page ↗ · Beyma linked datasheet ↗

Listed in the official global manufacturer catalogue. Confirm production and regional stock with Beyma or its reseller.

Data may change without notice. Check the exact source revision and original drawing before machining or purchasing.

Search Beyma references →