Beyma 6MI100 · 8 Ω
6.5-inch midrange driver with a ferrite motor and die-cast aluminium basket. This is the 8 Ω reference; its published 100–8,000 Hz range is a manufacturer reference, not a suggested crossover setting.
Driver specifications
- Brand
- Beyma
- Type
- Midrange
- Nominal size
- 6.5 inches / 165 mm
- Nominal impedance
- 8 Ω
- Minimum impedance
- 6.8 Ω
- Power capacity
- 250 W AES; AES2-1984 (r2003) test stated in the linked datasheet.
- Program power
- 500 W program; the PDF defines this as capacity for normal music programme material.
- Sensitivity
- 94 dB SPL, 1 W / 1 m at nominal impedance. PDF response measured on an infinite baffle in an anechoic chamber.
- Published frequency range
- 100–8000 Hz
- Voice-coil diameter
- 50.8 mm
- Overall frame
- 174 mm
- Front-mount cutout
- 146 mm
- Mounting bolt circle
- 158 mm
- Overall depth
- 85 mm
- Mounting depth behind flange
- Not separately verified
- Source revision
- Exact 8 Ω official reference; linked PDF revision 12/14
- Source checked
- 2026-10-06
Manufacturer mounting table: 174 mm overall frame, 158 mm bolt circle, 146 mm front-mount cutout and 85 mm overall depth. Behind-flange mounting depth is not separately entered.
Thiele/Small parameters
- Fs · resonance
- 128 Hz
- Qts · total Q
- 0.51
- Qes · electrical Q
- 0.55
- Qms · mechanical Q
- 8.6
- Vas · equivalent volume
- 3.1 L
- Re · DC resistance
- 6 Ω
- Le · inductance at 1 kHz
- 0.2 mH
- Sd · piston area
- 140 cm²
- BL · force factor
- 10.8 N/A
- Mms · moving mass
- 14 g
- Cms · compliance
- 0.119 mm/N
- Rms · mechanical resistance
- 1.2 kg/s
- Xmax · manufacturer definition
- 3 mm
- Vd · published displacement
- 42 cm³
Cms converted from 119 µm/N to 0.119 mm/N; Sd from 0.014 m² to 140 cm²; Mms from 0.014 kg to 14 g. Beyma specifies preconditioning before T/S measurement, using a velocity-current laser transducer. Le is listed at 1 kHz on the product page. Published Xmax uses (voice-coil length − air-gap height)/2 + air-gap height/3.5. These reference parameters do not replace measurements of an individual unit.
Technical sources & availability
Beyma exact-variant product page ↗ · Beyma linked datasheet ↗
Listed in the official global manufacturer catalogue. Confirm production and regional stock with Beyma or its reseller.
Data may change without notice. Check the exact source revision and original drawing before machining or purchasing.
