SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Beyma 5MP60/N · 8 Ω

Five-inch, 8-ohm low/mid-frequency reference. The manufacturer lists an 8-litre, 54-Hz bass-reflex example; it is not a universal cabinet alignment.

PDF ↗Manufacturer ↗

Driver specifications

Brand
Beyma
Type
Woofer
Nominal size
5 inches / 125 mm
Nominal impedance
8 Ω
Minimum impedance
5.5 Ω
Power capacity
50 W RMS as labelled by Beyma; linked PDF specifies AES2-1984 (r2003) testing.
Program power
100 W program rating; distinct from the continuous/AES rating.
Sensitivity
88 dB SPL, 1 W / 1 m at nominal impedance. Linked response graph: infinite baffle in an anechoic chamber.
Published frequency range
65–12000 Hz
Voice-coil diameter
25.4 mm
Overall frame envelope
150 mm
Front-mount baffle cutout
120 mm
Overall depth
68 mm
Mounting depth behind flange
Not separately verified
Source revision
Official product page; mounting PDF revision 11/18
Source checked
2026-10-06
Mounting bolt circle
137 mm

The PDF lists a 150 mm overall frame envelope; its non-circular front drawing shows 133 mm side dimensions. Do not treat 150 mm as a circular baffle cutout. The stated 68 mm is overall front-to-rear depth, not a verified behind-flange mounting depth.

Thiele/Small parameters

Fs · resonance
63 Hz
Qts · total Q
0.46
Qes · electrical Q
0.58
Qms · mechanical Q
2.3
Vas · equivalent volume
5.8 L
Re · DC resistance
5.33 Ω
Le · inductance at 1 kHz
0.2 mH
Sd · piston area
85 cm²
BL · force factor
6.4 N/A
Mms · moving mass
11 g
Cms · compliance
0.564 mm/N
Rms · mechanical resistance
2 kg/s
Xmax · manufacturer definition
5.5 mm
Vd · published displacement
46 cm³

Product-page T/S values; the linked PDF rounds Re to 5.3 Ω while the page states 5.33 Ω. Cms converted from 564 µm/N to 0.564 mm/N; Sd from 0.0085 m² to 85 cm²; Mms from 0.011 kg to 11 g. Le is specified at 1 kHz. Published Vd is 46 cm³. Beyma states that T/S measurements follow driver preconditioning using a velocity-current laser transducer. Published Xmax uses (voice-coil length − gap height)/2 + gap height/3.5. Reference values do not replace measurements of an individual unit.

Technical sources & availability

Beyma exact-variant product page ↗ · Beyma linked datasheet ↗

Listed in the global manufacturer catalogue, but regional distributor catalogues may differ. Confirm current production and stock with Beyma or its reseller.

Data may change without notice. Review the exact source revision and original drawing before machining or purchasing.

Search Beyma references → · Woofer directory →