SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Beyma 12BR70 · 8 Ω

Twelve-inch, 8-ohm low-frequency reference with a ferrite motor. The global catalogue listing does not certify current production or regional stock.

PDF ↗Manufacturer ↗

Driver specifications

Brand
Beyma
Type
Woofer
Nominal size
12 inches / 300 mm
Nominal impedance
8 Ω
Minimum impedance
6.6 Ω
Power capacity
125 W RMS as labelled by Beyma; linked PDF specifies AES2-1984 (r2003) testing.
Program power
250 W program rating; distinct from the continuous/AES rating.
Sensitivity
93 dB SPL, 1 W / 1 m at nominal impedance; product page states 2π. Linked response graph: infinite baffle in an anechoic chamber.
Published frequency range
35–4000 Hz
Voice-coil diameter
50.8 mm
Overall frame envelope
Awaiting revision review
Front-mount baffle cutout
Awaiting revision review
Overall depth
Withheld pending revision review
Mounting depth behind flange
Not separately verified
Source revision
Official product-page numerical table checked 6 October 2026; linked PDF dated 10/20
Source checked
2026-10-06

Mounting dimensions are withheld pending revision reconciliation: the linked 10/20 PDF states 134 mm depth, while the 2025 catalogue lists 126 mm. No cutout or complete geometry is certified for this record.

Thiele/Small parameters

Fs · resonance
31 Hz
Qts · total Q
0.5
Qes · electrical Q
0.56
Qms · mechanical Q
4.44
Vas · equivalent volume
142 L
Re · DC resistance
5.6 Ω
Le · inductance at 1 kHz
0.8 mH
Sd · piston area
540 cm²
BL · force factor
12.1 N/A
Mms · moving mass
74 g
Cms · compliance
0.345 mm/N
Rms · mechanical resistance
3.3 kg/s
Xmax · manufacturer definition
8 mm
Vd · published displacement
340 cm³

Product-page values; the linked PDF rounds Qms to 4.4 while the page gives 4.44. Cms converted from 345 µm/N to 0.345 mm/N; Sd from 0.054 m² to 540 cm²; Mms from 0.074 kg to 74 g. Le is specified at 1 kHz. Beyma publishes Vd = 340 cm³; this does not equal Sd × the stated 8 mm Xmax (432 cm³). Retain the published reference separately and confirm this discrepancy before excursion-based design. Beyma states that T/S measurements follow driver preconditioning using a velocity-current laser transducer. Published Xmax uses (voice-coil length − gap height)/2 + gap height/3.5. Reference values do not replace measurements of an individual unit.

Technical sources & availability

Beyma exact-variant product page ↗ · Beyma linked datasheet ↗

Listed in the global manufacturer catalogue; a regional distributor lists this model among discontinued references. Confirm production and available stock directly; neither listing alone establishes worldwide status.

Data may change without notice. Review the exact source revision and original drawing before machining or purchasing.

Search Beyma references → · Woofer directory →