B&C Speakers 8PS21 (8 Ω)
B&C Speakers 8PS21 (8 Ω) woofer reference. 8 ohm. Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- B&C Speakers
- Type
- Woofer
- Collection
- Manufacturer catalogue
- Nominal size
- 8 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- See source
- Overall diameter
- 225 mm
- Baffle cutout
- 187 mm
- Mounting depth behind flange
- Awaiting source review
- Resonance (Fs)
- 73 Hz
- Total Q (Qts)
- 0.33
- Equivalent volume (Vas)
- 14 litres
- Source checked
- 2026-10-03
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
T/S parameters measured after high-level 20 Hz sine-wave preconditioning. Overall depth is not treated as mounting depth. Check the original source for excursion and test definitions.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 73 Hz
- Qts · total Q
- 0.33
- Qes · electrical Q
- 0.36
- Qms · mechanical Q
- 4.2
- Vas · equivalent volume
- 14 L
- Re · DC resistance
- 5.4 Ω
- Le · inductance
- 0.5 mH
- Sd · piston area
- 220 cm²
- BL · force factor
- 12.6 N/A
- Mms · moving mass
- 23 g
- Cms · compliance
- Awaiting source review
- Rms · mechanical resistance
- Awaiting source review
- Xmax · linear excursion
- 5 mm
- Vd · displacement
- Awaiting source review
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
No verified CAD resource
Original manufacturer specifications. Complete geometry is unverified; no CAD file is hosted or offered.
No verified CAD link is offered for this record.
Technical sources
View manufacturer documentation ↗Manufacturer technical reference. Confirm production status, revision and distributor stock before purchasing.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.