◉SpeakerFoundryFREE DRIVER RESOURCES / 01
HISTORICAL DRIVER REFERENCE

Altec Lansing 909-8A

Altec Lansing 909-8A compression reference (8 Ω): historical ratings, measurement conditions and external documentation.

PDF / documentation ↗

Driver specifications

Driver type
Compression
Format
High-frequency compression driver
Impedance
8 Ω minimum
Overall diameter
139.7 mm
Depth
68.58 mm — 2.7 in, excluding mounting studs; original inch measurement converted to millimetres.
Published range
500–20000 Hz
Sensitivity
108 dB SPL — 1 W, pink noise 500–3150 Hz; 1 m from Altec MR994A or 511B horn, reference 20 μPa. The 144 dB plane-wave-tube figure is deliberately not presented as a free-field rating.
Published power
30 W — AES method, 500–5000 Hz, displacement-limited; 60 W programme / 120 W peak. At 800–8000 Hz: 40 W AES, thermal-limited / 80 W programme / 160 W peak. These ratings are distinct.
Voice-coil diameter
44.45 mm
Document revision
Original Altec 909-8A / 909-16A shared technical sheet

Original Altec technical reference; horn, signal bandwidth and rating method remain part of each specification.

Thiele/Small parameters & excursion

Historical T/S values are not published here without two credible corroborating sources for the exact variant. Dimensions below are reference measurements, not complete CAD geometry. Published impedance is the minimum. Voice-coil resistance remains in the original sheet; no vintage T/S set is asserted.

Availability & original sources

Discontinued historical component. Used-unit availability, restoration and condition must be checked individually.

Original technical reference ↗

Source checked 2026-10-06. Manufacturer drawings, photographs and datasheets remain at their external sources.

Search & compare Altec Lansing drivers →

Design a crossover from measured response → · Explore cabinet calculators →