Altec Lansing 909-16A
Altec Lansing 909-16A compression reference (16 Ω): historical ratings, measurement conditions and external documentation.
Driver specifications
- Driver type
- Compression
- Format
- High-frequency compression driver
- Impedance
- 16 Ω minimum
- Overall diameter
- 139.7 mm
- Depth
- 68.58 mm — 2.7 in, excluding mounting studs; original inch measurement converted to millimetres.
- Published range
- 500–20000 Hz
- Sensitivity
- 108 dB SPL — 1 W, pink noise 500–3150 Hz; 1 m from Altec MR994A or 511B horn, reference 20 μPa. The 144 dB plane-wave-tube figure is deliberately not presented as a free-field rating.
- Published power
- 30 W — AES method, 500–5000 Hz, displacement-limited; 60 W programme / 120 W peak. At 800–8000 Hz: 40 W AES, thermal-limited / 80 W programme / 160 W peak. These ratings are distinct.
- Voice-coil diameter
- 44.45 mm
- Document revision
- Original Altec 909-8A / 909-16A shared technical sheet
Original Altec technical reference; horn, signal bandwidth and rating method remain part of each specification.
Thiele/Small parameters & excursion
Historical T/S values are not published here without two credible corroborating sources for the exact variant. Dimensions below are reference measurements, not complete CAD geometry. Published impedance is the minimum. Voice-coil resistance remains in the original sheet; no vintage T/S set is asserted.
Availability & original sources
Discontinued historical component. Used-unit availability, restoration and condition must be checked individually.
Original technical reference ↗Source checked 2026-10-06. Manufacturer drawings, photographs and datasheets remain at their external sources.
Search & compare Altec Lansing drivers →
Design a crossover from measured response → · Explore cabinet calculators →