Altec Lansing 908-8B
Altec Lansing 908-8B compression reference (8 Ω): historical ratings, measurement conditions and external documentation.
Driver specifications
- Driver type
- Compression
- Format
- High-frequency compression driver
- Impedance
- 8 Ω minimum
- Overall diameter
- 139.7 mm
- Published range
- 500–20000 Hz
- Sensitivity
- 105 dB SPL — 1 W (2.83 V), pink noise 500–5000 Hz; 1 m from the mouth of an Altec 511B horn, reference 20 μPa.
- Published power
- 150 W — Continuous programme, 1000–20000 Hz on an Altec 511B horn; corresponding noise test 75 W / 25 V. At 500–20000 Hz: 80 W programme, corresponding noise test 40 W / 17.9 V.
- Voice-coil diameter
- 44.45 mm
- Document revision
- Altec AL-2403, Revision 5, 1986
Original Altec technical reference; horn, signal bandwidth and rating method remain part of each specification.
Thiele/Small parameters & excursion
Historical T/S values are not published here without two credible corroborating sources for the exact variant. Dimensions below are reference measurements, not complete CAD geometry. Depth is withheld because the specifications and dimensioned drawing differ. The published impedance is a minimum, not a nominal impedance.
Availability & original sources
Discontinued historical component. Used-unit availability, restoration and condition must be checked individually.
Original technical reference ↗Source checked 2026-10-06. Manufacturer drawings, photographs and datasheets remain at their external sources.
Search & compare Altec Lansing drivers →
Design a crossover from measured response → · Explore cabinet calculators →