◉SpeakerFoundryFREE DRIVER RESOURCES / 01
DISCONTINUED DRIVER REFERENCE

Altec Lansing 904-8A

Altec 904-8A Duplex vintage reference: Mantaray/Tangerine HF construction, original EQ controls, network slopes and documented source limits.

PDF / documentation ↗

Driver specifications

Type
Coaxial
Nominal size
16 in
Impedance
8 Ω
Overall diameter
406.4 mm
Baffle cutout
358.78 mm
Published range
60–15000 Hz
Published power
150 W — Continuous pink noise, 60 Hz–15 kHz, 34.6 V; complete driver with supplied network.
Sensitivity
100 dB SPL — 1 W, band-limited pink noise 100 Hz–10 kHz, on axis at 1 m, installed in the Altec 930 enclosure.
Crossover
1500 Hz
Document
Revision 4, May 1987, AL-2295

Two-way Duplex coaxial driver with a 60° horizontal × 40° vertical horn and a supplied crossover/equalisation network. The source specifies 12 dB/octave LF and 18 dB/octave HF electrical sections.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original coaxial construction and network
Horn
Mantaray constant-directivity horn, 60 degrees horizontal × 40 degrees vertical
HF diaphragm / phase plug
Symbiotik diaphragm and Tangerine phasing plug in the original description
Coil diameters
LF: 3 inches; HF: 1 3/4 inches
Magnet weights
LF: 5.6 lb; HF: 2.5 lb, not bare-driver net weight
Network
Supplied 1500 Hz dual-section network; LF 12 dB/octave and HF 18 dB/octave slopes

This is the exact 904-8A assembly; 604 and other Duplex variants are not substituted.

Original Altec documentation ↗ · AL-2295, original specification

Original EQ and system conditions
EQ ON
Separate midrange and high-frequency controls
EQ OFF
A conventional two-way crossover with one control for mid-through-HF attenuation
Original cabinet reference
930C recommended enclosure; sensitivity description references the Altec 930 enclosure
Sensitivity
100 dB at 1 m with 1 W of 100 Hz–10 kHz pink noise
Driver weight
34 lb (15.5 kg) including the network

Read the exact network and enclosure revision; control positions do not transfer to a new crossover design.

Original Altec documentation ↗

Unresolved original specifications
Mounting depth
Original table and drawing are inconsistent; no verified mounting depth is entered
Historical T/S
Printed free-air resonance differs between table and engineering text; independent exact-variant corroboration is still required

Source discrepancies stay visible rather than being silently corrected.

Original Altec documentation ↗

Thiele/Small parameters

Historical T/S values remain unpublished until corroborated by two credible sources for this exact variant. Depth is withheld because the mounting drawing and specifications give conflicting values. The T/S table and engineering paragraph also disagree on free-air resonance. Cutout uses the original 14⅛-inch dimension.

Availability & sources

Discontinued historical driver. Used-unit availability and condition are not verified.

Original Altec technical document ↗

Original scans and CAD files remain with their external sources.

Search Altec Lansing drivers →