SpeakerFoundry
VINTAGE DRIVER REFERENCE

Altec Lansing 808-8B

Original Altec 808-8B 8 Ω compression driver with a Symbiotik diaphragm, aluminium ribbon coil and Alnico V magnet. Its power and sensitivity figures retain the original horn, dividing-network, noise-band and 4 ft measurement conditions.

PDF / documentation ↗

Driver specifications

Brand
Altec Lansing
Type
Compression
Nominal size
High-frequency compression driver
Nominal impedance
8 Ω
Original document
Altec AL-1209, print code 877-2.5M; archive describes circa 1977
Voice-coil diameter / construction
44.45 mm / Aluminium Edgewound ribbon
Diaphragm
Symbiotik diaphragm; original source does not identify it as a wholly aluminium diaphragm
Magnet material
Alnico V
Power rating
30 W. Up to 30 W continuous pink noise, 500–20000 Hz, with the appropriate Altec dividing network and a 511A, 511B or 811B horn. This historical rating is not relabelled AES.
Published frequency range
500–20000 Hz. 500–20000 Hz with a 511A/511B horn and N501-8A network. The original sheet also lists 800 Hz and 1200 Hz lower limits with other named networks and horns; these are not bare-driver responses.
Pressure sensitivity
104 dB SPL. 1 W input, on axis 4 ft from the mouth of a 511A/511B or 811B horn. Pink noise 500–3000 Hz for 511-type horns, or 800–3000 Hz for 811B, per the engineering specification; reference 20 μPa. Not a 1 m rating.
Horn / crossover combinations
Original combinations: 511A/511B at 500 Hz with N501-8A; 511A/511B/811B at 800 Hz with N801-8A or N809-8A, or at 1200 Hz with N1209-8A. Appropriate horn and network required.
Magnet mass
1.2 lb; not moving mass Mms
Magnetic-gap flux
15250 gauss. Specification-table magnetic-gap flux density. Engineering text specifies at least this value; not force factor BL.
Driver mass
7 lb
Overall diameter
114.3 mm
Overall depth
93.6625 mm; not verified mounting depth
Mounting depth behind flange
Not established
Source checked
2026-10-09

Original 4½-inch diameter and 3-11/16-inch overall depth converted at 25.4 mm/in. Overall depth is not behind-flange mounting depth. Complete horn attachment and machining tolerances require a dimensioned original drawing.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction & service
Diaphragm / coil
Symbiotik diaphragm with edgewound aluminium ribbon coil
Service alignment
Factory diaphragm/coil assembly is replaceable and uses self-centring dowels
Phase-plug design
Tangerine radial phase plug
Original finish
Black matte

No replacement diaphragm part number is specified in this reviewed sheet; a number from another revision is not substituted.

Original Altec 808-8B literature ↗ · Pages 1–2

Original accessories
Autotransformer
Altec Model 15067 (original optional accessory)
Horn / network examples
511A/511B with N501-8A at 500 Hz; 511A/511B/811B with N801-8A or N809-8A at 800 Hz

These historical combinations require the named horn and network; current accessory availability is not tracked.

Original Altec 808-8B literature ↗ · Page 2

Identify the reference
Original publication
AL-1209, print code 877-2.5M; archive describes circa 1977
Rear-label identification
Manufacturer illustration labels 808-8B and 8 ohms

Original publication and label examples identify the reference; they do not prove the original parts or date of a used unit.

Original Altec 808-8B literature ↗ · Page 2 / archive context

Thiele/Small parameters

Historical T/S values remain unlisted until corroborated by two credible sources for this exact original variant. Later revisions, replacements and reconed units are not substituted.

Technical sources & availability

Original Altec literature at Lansing Heritage ↗

Out-of-production original Altec reference. Used-unit availability, original parts, reconing and condition require individual confirmation.

Confirm the exact variant and original mounting drawing before machining.

Search Altec references → · Vintage driver directory →