Altec Lansing 515-8G
Altec 515-8G 8-ohm vintage horn woofer: original enclosure-dependent response/sensitivity, aluminium-ribbon coil and front/rear mounting context.
Driver specifications
- Type
- Woofer
- Nominal size
- 16 in
- Impedance
- 8 Ω
- Overall diameter
- 406.4 mm
- Depth
- 169.86 mm — Rear mounting: 6 11/16 in. Front-mount depth: 5 7/8 in (149.23 mm).
- Published range
- 50–4000 Hz — In the Altec 828G enclosure; low-frequency endpoint is −3 dB. Other enclosures have different ranges.
- Published power
- 75 W — AES-style noise rating: 6 dB crest factor, 60–600 Hz band limit, power calculated as E²/R.
- Sensitivity
- 103 dB SPL — 1 W (E²/R), band-limited pink noise 100–1000 Hz, free field on axis at 4 ft (1.2192 m), in the Altec 828G enclosure; not a 1 m rating.
- Voice-coil diameter
- 76.2 mm
- Document
- 515-G series, Revision 1, AL-2422, print code 486-5M
Ferrite low-frequency horn driver. Enclosure-dependent response and sensitivity are shown for the 828G configuration. The 8G, 16G and 8GHP variants retain their own impedance and power ratings.
Construction, mounting & original reference
Open a section for documented details and its original source.
Exact model construction and rating
- Variant
- 515-8G; 8 ohms nominal
- Voice coil
- 3-inch edgewound aluminium ribbon
- Frame / suspension
- Die-cast aluminium frame and low-distortion cloth suspension
- Magnet
- Ferrite; 132 oz magnet weight, distinct from 30 lb driver weight
- Original noise rating
- 75 W (25 V in original table); 60–600 Hz pink noise, 6 dB crest factor
Power is calculated with the original E²/R method. 515-8G, 515-16G and 515-8GHP remain separate variants.
Original Altec documentation ↗ · AL-2422 Revision 1, pages 1–2
Enclosure-dependent reference conditions
- 828G
- 50–4000 Hz; 103 dB
- 816A
- 60–4000 Hz; 102 dB
- 817A
- 55–4000 Hz; 104.5 dB
- 210/211
- 40–4000 Hz; 107 dB
Each low-frequency endpoint is the original −3 dB point for that enclosure. Sensitivity uses 1 W of 100–1000 Hz pink noise measured on axis at 4 feet in free field; not a 1 m rating or a modern cabinet alignment.
Original Altec documentation ↗ · AL-2422 Revision 1, page 2
Mounting drawing and unresolved cutout
- Front-mounted depth
- 5 7/8 inches (about 149.2 mm)
- Rear-mounted depth
- 6 11/16 inches (about 169.9 mm)
- Fixing layout
- Eight slots at 45-degree intervals
- Cutout conflict
- The table and drawing disagree on the inch opening; printed metric conversions also disagree, so generic cutout remains unfilled
- Excursion distinction
- Maximum before-damage peak-to-peak excursion is separate from linear Xmax; no historical T/S values are newly entered
Use the original drawing and physical unit for fit checks. These reference dimensions do not establish a complete CAD model.
Original Altec documentation ↗ · AL-2422 Revision 1, pages 2 and 4
Thiele/Small parameters
Historical T/S values remain unpublished until corroborated by two credible sources for this exact variant. Baffle cutout is withheld because the table, drawing and printed metric conversions disagree. Depth is specified separately for front and rear mounting.
Availability & sources
Discontinued historical driver. Used-unit availability and condition are not verified.
Original Altec technical document ↗Original scans and CAD files remain with their external sources.