◉SpeakerFoundryFREE DRIVER RESOURCES / 01
DISCONTINUED DRIVER REFERENCE

Altec Lansing 421A

Altec 421A vintage musical-instrument driver: original aluminium-ribbon coil, mounting layout, weight distinctions and band-specific sensitivity references.

PDF / documentation ↗

Driver specifications

Type
Woofer
Nominal size
15 in
Impedance
8 Ω
Overall diameter
388.94 mm
Baffle cutout
346.08 mm
Overall loudspeaker depth
158.75 mm; behind-flange depth not separately established
Published range
35–8000 Hz
Published power
100 W — Manufacturer recommendation: amplifier rated up to 100 W continuous, with programme material; not an AES noise rating.
Sensitivity
97 dB SPL — 1 W, band-limited pink noise 100 Hz–10 kHz, on axis at 4 ft (1.2192 m), reference 20 μPa; not a 1 m measurement.
Voice-coil diameter
76.2 mm
Document
AL-1814-2, print code CP-1073-5K

Musical-instrument cone driver with an aluminium-ribbon voice coil. The 421A is recorded separately from later 421 variants.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original construction and mounting
Purpose
Musical-instrument loudspeaker; exact 421A variant
Frame / cone
Reinforced die-cast aluminium frame and moulded-fibre cone
Coil / suspension
3-inch edgewound aluminium ribbon coil; resistively damped high-compliance cloth surround
Fixing layout
4 equally spaced mounting holes on the original drawing
Published depth
6 1/4 inches (158.75 mm) loudspeaker depth; a behind-flange reference plane is not separately stated
Mass distinctions
20 lb 11 oz driver; 17.5 lb magnetic assembly; 4.875 lb magnet

421A and 421-8H differ in coil material and fixing count; their parts are not assumed interchangeable.

Original Altec documentation ↗ · Original specification page 2

Original sensitivity and amplifier conditions
100 Hz–10 kHz pink noise
97 dB at 4 feet on axis with 1 W
100–1000 Hz pink noise
98 dB at 4 feet on axis with 1 W
500–1000 Hz pink noise
99 dB at 4 feet on axis with 1 W
Power wording
Original recommendation for amplifiers rated up to 100 W continuous, using programme material

The three sensitivity figures use different signal bands. None is relabelled as a 1 m rating or an AES driver-power test.

Original Altec documentation ↗ · Original specification page 2

Thiele/Small parameters

Historical T/S values remain unpublished until corroborated by two credible sources for this exact variant. Physical dimensions use the original inch values converted to millimetres.

Availability & sources

Discontinued historical driver. Used-unit availability and condition are not verified.

Original Altec technical document ↗

Original scans and CAD files remain with their external sources.

Search Altec Lansing drivers →