◉SpeakerFoundryFREE DRIVER RESOURCES / 01
DISCONTINUED DRIVER REFERENCE

Altec Lansing 421-8LF

Altec 421-8LF preliminary vintage reference: frame-dimension limits, mounting variation, coil construction and original noise-rating conditions.

PDF / documentation ↗

Driver specifications

Type
Woofer
Nominal size
15 in
Impedance
8 Ω
Baffle cutout
358.78 mm
Overall loudspeaker depth
158.75 mm; behind-flange depth not separately established
Published range
35–8000 Hz
Published power
100 W — Continuous pink noise, band-limited 35–1000 Hz; preliminary sheet.
Sensitivity
97 dB SPL — 1 W, band-limited pink noise 250–1000 Hz, on axis at 4 ft (1.2192 m); not a 1 m measurement.
Voice-coil diameter
76.2 mm
Document
Preliminary specification, AL-2271, print code 578-5M

Low-frequency cone driver in a nominal 15-inch class, with a larger frame. Values are from a preliminary Altec document and should be checked against the actual unit.

Construction, mounting & original reference

Open a section for documented details and its original source.

Preliminary mounting and frame limits
Document status
Preliminary Altec AL-2271; print code 578-5M
Diameter discrepancy
Table: 16 inches; engineering paragraph: maximum 16 1/8 inches. No single verified frame diameter is substituted
Fixing layout
Eight equally spaced positions; the original sheet explicitly permits a range of bolt-circle positions
Depth wording
6 1/4 inches (158.75 mm) loudspeaker depth; behind-flange depth is not separately defined

Read the complete original mounting drawing; the printed bolt-circle variation is not a general tolerance for a newly machined baffle.

Original Altec documentation ↗ · Page 2

Original construction and rating context
Frame / cone
Reinforced die-cast aluminium and moulded fibre
Coil / former
3-inch copper-ribbon coil; aluminium support with Kapton insulation
Surround
High-compliance cloth with mechanical resistance
Continuous noise rating
100 W pink noise, band-limited 35–1000 Hz
Sensitivity reference
97 dB, 1 W of 250–1000 Hz pink noise, on axis at 4 feet

The 35–8000 Hz published response band differs from the 35–1000 Hz noise-power test band. Maximum cone excursion is not assumed to be one-way linear Xmax.

Original Altec documentation ↗ · Page 2

Thiele/Small parameters

Historical T/S values remain unpublished until corroborated by two credible sources for this exact variant. Overall frame diameter is withheld: the table gives 16 inches while the engineering specification gives a 16⅛-inch maximum. Cutout and depth use the original inch values.

Availability & sources

Discontinued historical driver. Used-unit availability and condition are not verified.

Original Altec technical document ↗

Original scans and CAD files remain with their external sources.

Search Altec Lansing drivers →