◉SpeakerFoundryFREE DRIVER RESOURCES / 01
DISCONTINUED DRIVER REFERENCE

Altec Lansing 416-8C

Altec 416-8C vintage woofer: original front/rear mounting-depth references, eight-slot fixing layout, construction and historical rating conditions.

PDF / documentation ↗

Driver specifications

Type
Woofer
Nominal size
16 in
Impedance
8 Ω
Overall diameter
406.4 mm
Baffle cutout
358.78 mm
Mounting depth
See original front/rear drawing; conflicting single-depth references
Published range
20–1600 Hz
Published power
75 W — Continuous pink noise, band-limited 20–1600 Hz.
Voice-coil diameter
76.2 mm
Document
Original Altec 416-8C specification sheet

Ferrite-magnet woofer with a 3-inch copper-ribbon voice coil. Sensitivity depends on the specified enclosure and was measured at four feet; it is not presented here as a one-metre rating.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original front and rear mounting references
Front-mounted depth BF
5 9/16 inches (about 141.3 mm), labelled BF in the drawing
Rear-mounted depth BR
6 3/8 inches (about 161.9 mm), labelled BR in the drawing
Fixing layout
Eight slotted fixing positions spaced 45 degrees apart
Depth inconsistency
The engineering paragraph separately states 6 1/4 inches; a single generic mounting-depth value is withheld

Front and rear mounting reference planes differ. Follow the original dimensioned drawing and check the physical driver before machining.

Original Altec documentation ↗ · AL-1852-5, page 2

Construction and historical role
Basket / coil
Reinforced die-cast aluminium basket; 3-inch edgewound copper-ribbon voice coil
Surround
Treated high-compliance cloth
Rating context
75 W continuous pink noise, band-limited 20–1600 Hz
Sensitivity context
Original sensitivity depends on enclosure; the 4-foot distance is retained

The original printed metric cutout and weight conversions are inconsistent; no dimensions or mass are inferred from the photograph.

Original Altec documentation ↗ · AL-1852-5

Thiele/Small parameters

Historical T/S values remain unpublished until corroborated by two credible sources for this exact variant. Dimensions use the sheet’s inch values converted to millimetres; the printed metric cutout and weight are inconsistent.

Availability & sources

Discontinued historical driver. Used-unit availability and condition are not verified.

Original Altec technical document ↗

Original scans and CAD files remain with their external sources.

Search Altec Lansing drivers →