Treble takes a fold: meet SATORI’s AT60NC-4
Current catalogue profile · not a listening review
The AT60NC-4 offers a different-looking approach to treble. Its published filter conditions are just as interesting as its diaphragm.

A familiar dome tweeter presents a small curved surface to the room. SATORI’s AT60NC-4 has a very different face. Its folded diaphragm invites a closer look at an air-motion approach to treble, and at the choices that surround the visible part.
The diaphragm is only one chapter
SB Acoustics identifies precision diaphragm assembly, foil damping, an optimised rear chamber and a two-part faceplate among its design features. The published product page places the AT60NC-4 in the Kapton family. Its photograph shows the actual model, not a generic ribbon tweeter.
The nominal impedance is 4 Ω. SB lists 91 dB sensitivity at 2.83 V / 1 m and a stated frequency range of 2,400–30,000 Hz. A response-range endpoint is not, by itself, permission to choose any crossover slope at that frequency.
A power rating comes with a filter
The quoted 100 W rating carries a specific condition: IEC 268-5 with a 2,600 Hz, 12 dB/octave Butterworth high-pass. Removing the filter condition from the number would remove a useful part of the specification.
For a builder, the next chapter is matching: response, output capability and radiation pattern alongside the chosen woofer. The appearance may draw us in, but measured integration should decide the finished design. Would you start with the diaphragm technology, or with the listening geometry you want your loudspeaker to achieve?
Follow the story
Sources & image credits
Sources reviewed 9 October 2026. This is an original editorial account of published information; manufacturer performance claims have not been independently tested by SpeakerFoundry. Photos retain their credited owners’ rights and any linked reuse licences. Manufacturer datasheets remain external.
- SB Acoustics: SATORI AT60NC-4 features, response range and power-test conditions ↗
- SB Acoustics: original AT60NC-4 datasheet, Revision 6, 22 March 2022 (external PDF) ↗
- Vance Dickason: original AT60NC-4 AMT test-bench report, Voice Coil / audioXpress, 2021 ↗
Spotted a correction? Contact the editor →.
Discussion
Questions, evidence and practical experience are welcome.
Comments are reviewed before publication. Keep it constructive, link your sources and avoid personal details. Discussion guidelines →
Loading discussion…
Showing the first 200 comments in this discussion.